Description
The IQ-LEDEX is a GU10 LED spotlight bulb that pushes out a directional beam from a compact PAR16 body measuring Ø50 by 54 mm. It draws only 2.5W yet delivers 450 lumens of crisp 4000K cool white light, with a wide 100 degree beam that spreads coverage further than a typical narrow spot. The GU10 cap is the familiar twist-lock mains fitting, so the bulb runs straight off 220 to 240V mains with no separate transformer or driver needed.
Because the beam is wide at 100 degrees, this bulb suits general accent and downlighting roles rather than tight pinpoint highlighting, making it a sensible fit for recessed ceiling spots, track heads and adjustable fittings across kitchens, hallways, living rooms and offices. The cool white 4000K tone gives a neutral, daylight-leaning light that reads well in work areas and food-prep zones where clarity matters. As an indoor IP20 bulb it should be kept to dry interior fittings, and a cluster of several in a ceiling layout gives even, low-glare spread without the heat of older halogen spots.
Light output is rated at 450 lm with an efficiency of 180 lm/W and a colour rendering of Ra 80, and the 2.5W draw replaces a 50W old-style bulb for the same brightness while cutting running cost. The bulb is non-dimmable, so it is best paired with a standard on/off circuit. Build is a silver-finished PAR16 housing weighing 52 g, rated for a 50,000 hour lifespan. We stock this GU10 across other wattages and colour temperatures in the same range for matched fittings throughout a property.
Specification
| Cap / fitting |
GU10 twist-lock |
| Bulb shape |
Spotlight |
| Power |
2.5 W |
| Replaces |
50 W incandescent |
| Luminous flux |
450 lm |
| Efficiency |
180 lm/W |
| Colour temperature |
4000K (Cool White) |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
100° |
| Dimmable |
No |
| Rated life |
50000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has a GU10 cap, the standard twist-lock mains spotlight base. You push it into the holder and give it a quarter turn to lock. It runs directly off 220 to 240V mains, so no transformer or driver is required, unlike a low-voltage MR16 (GU5.3) two-pin bulb.
What old bulb wattage does it replace?
At just 2.5W of actual draw it produces 450 lumens, which matches the brightness of a 50W traditional bulb. That is a large saving in running cost over an old halogen GU10 spot, while giving the same usable light from the fitting.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It should be used on a standard on/off lighting circuit rather than a dimmer switch, as fitting a non-dimmable bulb to a dimmer can cause flicker or shorten its life.
What colour and beam does it give?
It produces 4000K cool white, a neutral daylight-leaning tone that suits kitchens, work areas and offices. The beam is wide at 100 degrees, so it spreads light more broadly than a narrow spot, with a colour rendering of Ra 80 for natural-looking colours.