Description
The Iper LED is a round bulkhead light running 35W from a 220-240V AC supply and delivering 4200 lumens at a neutral 4000K white. A wide 120 degree beam spreads light evenly across the surface below, with no harsh hotspot, making it a practical choice where steady, all-over illumination matters more than a tight beam. Across the Atlantic this style of fitting is the outdoor wall pack, the workhorse luminaire bolted above doors and along service walls, and it covers the same ground here as an outdoor wall sconce would on a domestic frontage.
Mounted to a wall or a ceiling, the Iper suits entrances, porches, stairwells, corridors, car parks and the underside of canopies and soffits. The 4200 lumen output and broad spread throw a generous wash of light over a doorway, a landing or a short run of path, so it works well as a marker at thresholds and along access routes rather than as a single room's main light source. At 4000K the tone stays crisp and clear, which keeps signage, steps and surfaces easy to read at night. Its compact Ø350mm round form sits flat and unobtrusive against the building.
The body is moulded plastic in a white finish, sealed to IP65 so it copes with driving rain and direct exposure, and rated IK10 for strong resistance to knocks and vandalism in public or industrial settings. It runs as an integrated LED fitting with a rated life of around 50,000 hours and is not dimmable. Mounting is straightforward to either wall or ceiling, and at 1.10kg it is light to handle on site. The Iper LED range offers further bulkhead options for matching outdoor and utility installations.
Specification
| Power |
35W |
| Voltage |
220-240 AC |
| Luminous flux |
4200 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP65 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted, Wall Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø350 × 55 mm |
| Weight |
1.10 kg |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
Can the Iper LED be used outdoors?
Yes. It carries an IP65 rating, which means it is fully weatherproof and suitable for exposed outdoor positions as well as wet or damp locations. It can be fitted to external walls, porches, canopies and unsheltered service areas without issue.
Where is this bulkhead typically used?
It suits entrances, stairwells, corridors, car parks, porches and the undersides of canopies and soffits. The IK10 impact rating also makes it well suited to public, communal and industrial areas where fittings need to withstand knocks.
Does it take a replaceable bulb?
No. The Iper is an integrated LED fitting with the light source built in, rated for around 50,000 hours of use, so there is no separate bulb to fit or replace. When the unit reaches the end of its life the whole fitting is changed.
How do I clean and maintain it?
Wipe the white plastic surface with a soft, damp cloth and a mild detergent, avoiding abrasive cleaners that could scratch the diffuser. Make sure the fitting is switched off and cool first, and clean it periodically to keep the light output bright in dustier or exposed locations.