Iper LED 35W (35W) IP65 LED Bulkhead Light 350x350 - White

The Iper LED is a square surface-mounted bulkhead drawing 35W and putting out 4200 lumens at a neutral 4000K, spread through a wide 120 degree beam for even, shadow-free coverage close to the fitting. American buyers will recognise this format as an outdoor wall pack or wall sconce, the kind of robust integrated light used to wash a wall or doorway rather than throw a tight spot. It runs on 220-240V AC mains and carries an Ra 80 colour rendering, giving a clean white light that reads naturally on brickwork, render and signage.

With its IP65 weatherproof rating and IK10 impact resistance, the Iper LED suits fully exposed outdoor positions as well as sheltered ones: external walls, entrances, stairwells, car park soffits, plant rooms and damp utility areas. The 120 degree beam means it lights the immediate area broadly rather than projecting a long throw, so it works well as surface marking and access lighting where you want a bright, glare-controlled pool around the fitting. It can be fixed to a wall or to a ceiling, making it flexible for porches, undercrofts and covered walkways where overhead mounting is easier.

The body is moulded plastic in a white finish, measuring 350 by 350 by 55 mm and weighing 1.28 kg, with the LEDs and gear integrated behind a sealed diffuser to hold the IP65 seal. The IK10 rating is the top tier for impact, so it stands up to knocks in communal and industrial settings. This is a non-dimmable, mains-voltage fitting rated for 50,000 hours of service. Our Iper range also includes other wattages if you need a brighter or more compact option across a scheme.

Can the Iper LED be used outdoors?

Yes. It carries an IP65 rating, which means it is weatherproof and protected against water jets from any direction, so it is suitable for fully exposed outdoor walls and ceilings as well as sheltered spots. The IK10 rating also makes it highly resistant to impact.

Is a bulb included or is it integrated?

The Iper LED uses an integrated LED array rather than a replaceable bulb, so there is nothing to fit or change. It delivers 4200 lumens at 4000K and is rated for around 50,000 hours of use before output begins to fall.

Where is this fitting typically used?

It is well suited to external walls, doorways, stairwells, communal corridors, car parks, plant rooms and damp utility areas. The IK10 impact rating makes it a sensible choice for communal and industrial spaces where knocks are likely.

How do I keep the Iper LED clean?

Wipe the diffuser and white plastic body with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents that could mar the surface or compromise the IP65 seal. Always isolate the supply before cleaning.