Free Delivery on all orders over £99*

IPER LED 26W PIR Round Bulkhead Ø260 IP65 - White

£4299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The IPER LED is a round bulkhead light with a built-in PIR motion sensor, drawing 26W to deliver 3120 lumens at a neutral 4000K white. The 120 degree beam spreads light evenly across the surface it is mounted to, while the integrated sensor brings the fitting up automatically as someone approaches and lets it switch off again once the area is clear. North American specifiers will recognise this format as an outdoor wall pack or wall sconce, sized at 260mm across with a low 55mm projection so it sits close to the wall.

Because the PIR triggers on movement, this fitting earns its place where light is wanted only when needed rather than left burning. It suits porches, entrance doors, side passages, garages and outbuildings, as well as communal stairwells and corridors where hands are often full. The sensor coverage works best mounted at a typical doorway or eaves height with a clear line of sight to the approach, giving practical marking of a path or threshold rather than full ambient room lighting. Mounted to a ceiling soffit it casts the same wide spread downward over a doorway or walkway.

The body is moulded plastic with a white finish and an IP65 rating, so it is sealed against dust and direct water jets and is fully suited to exposed outdoor and wet locations. An IK10 impact rating adds resistance to knocks and tampering, which is useful in car parks and shared access areas. It can be fixed to either a wall or a ceiling, and the LED and sensor are integrated rather than relying on a replaceable lamp. This fitting is not dimmable, which is consistent with sensor-switched operation, and is rated for 50,000 hours. The IPER LED range includes plain non-sensor versions if you need a constant-on companion fitting elsewhere on the same site.

Specification
Power 26W
Voltage 220-240 AC
Luminous flux 3120 lm
Efficiency 120 lm/W
Colour temperature 4000K
Colour rendering (CRI) Ra 80
Beam angle 120°
IP rating IP65
IK rating IK10
Dimmable No
Mounting Ceiling Mounted, Wall Mounted
Lifespan 50,000 hours
Shape Round
Dimensions Ø260 × 55 mm
Weight 644 g
Material Plastic
Finish White
Frequently Asked

Can the IPER LED be used outdoors?

Yes. It carries an IP65 rating, so it is sealed against dust and direct water jets and is suitable for exposed outdoor and wet locations. It is equally at home on porches, garage walls and unheated outbuildings as it is in damp internal corridors.

How does the PIR sensor work and is it adjustable?

The built-in PIR detects movement within its field of view and switches the light on, then turns it off again once no motion is sensed. It works best mounted at doorway or eaves height with a clear view of the approach. Detection and timing behaviour follow the fitting's sensor settings, so position it facing the path you want it to cover.

Is a bulb included or do I need to buy one?

No separate bulb is needed. The LED is integrated into the fitting and is not user-replaceable, delivering 3120 lumens at 4000K with a rated life of 50,000 hours. When that life is reached the whole fitting is replaced rather than a lamp.

How should I clean the IPER LED?

Wipe the diffuser and body with a soft damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents on the plastic, and keep the sensor window clear of cobwebs and grime so detection stays reliable. Make sure the power is off before cleaning.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The IPER LED is a round bulkhead light with a built-in PIR motion sensor, drawing 26W to deliver 3120 lumens at a neutral 4000K white. The 120 degree beam spreads light evenly across the surface it is mounted to, while the integrated sensor brings the fitting up automatically as someone approaches and lets it switch off again once the area is clear. North American specifiers will recognise this format as an outdoor wall pack or wall sconce, sized at 260mm across with a low 55mm projection so it sits close to the wall.

    Because the PIR triggers on movement, this fitting earns its place where light is wanted only when needed rather than left burning. It suits porches, entrance doors, side passages, garages and outbuildings, as well as communal stairwells and corridors where hands are often full. The sensor coverage works best mounted at a typical doorway or eaves height with a clear line of sight to the approach, giving practical marking of a path or threshold rather than full ambient room lighting. Mounted to a ceiling soffit it casts the same wide spread downward over a doorway or walkway.

    The body is moulded plastic with a white finish and an IP65 rating, so it is sealed against dust and direct water jets and is fully suited to exposed outdoor and wet locations. An IK10 impact rating adds resistance to knocks and tampering, which is useful in car parks and shared access areas. It can be fixed to either a wall or a ceiling, and the LED and sensor are integrated rather than relying on a replaceable lamp. This fitting is not dimmable, which is consistent with sensor-switched operation, and is rated for 50,000 hours. The IPER LED range includes plain non-sensor versions if you need a constant-on companion fitting elsewhere on the same site.

    Specification
    Power 26W
    Voltage 220-240 AC
    Luminous flux 3120 lm
    Efficiency 120 lm/W
    Colour temperature 4000K
    Colour rendering (CRI) Ra 80
    Beam angle 120°
    IP rating IP65
    IK rating IK10
    Dimmable No
    Mounting Ceiling Mounted, Wall Mounted
    Lifespan 50,000 hours
    Shape Round
    Dimensions Ø260 × 55 mm
    Weight 644 g
    Material Plastic
    Finish White
    Frequently Asked

    Can the IPER LED be used outdoors?

    Yes. It carries an IP65 rating, so it is sealed against dust and direct water jets and is suitable for exposed outdoor and wet locations. It is equally at home on porches, garage walls and unheated outbuildings as it is in damp internal corridors.

    How does the PIR sensor work and is it adjustable?

    The built-in PIR detects movement within its field of view and switches the light on, then turns it off again once no motion is sensed. It works best mounted at doorway or eaves height with a clear view of the approach. Detection and timing behaviour follow the fitting's sensor settings, so position it facing the path you want it to cover.

    Is a bulb included or do I need to buy one?

    No separate bulb is needed. The LED is integrated into the fitting and is not user-replaceable, delivering 3120 lumens at 4000K with a rated life of 50,000 hours. When that life is reached the whole fitting is replaced rather than a lamp.

    How should I clean the IPER LED?

    Wipe the diffuser and body with a soft damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents on the plastic, and keep the sensor window clear of cobwebs and grime so detection stays reliable. Make sure the power is off before cleaning.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.