Description
The Iper LED is a square LED bulkhead measuring 260 x 260 mm, drawing 26W to deliver 3120 lumens at a neutral 4000K white. A wide 120 degree beam spreads light evenly across the surface below and to either side, giving broad, shadow-free illumination rather than a tight directional spot. With an integrated LED rather than a replaceable lamp, it is a fixed unit ready to run straight from a 220-240V AC mains supply. American buyers will recognise this format as an outdoor wall pack or wall sconce, the squat sealed fitting used to wash light down an entrance or along an external wall.
Its weatherproofing makes it well suited to porches, external doorways, stairwells, car parks and covered walkways, as well as damp internal spaces such as garages, plant rooms and utility areas. Mounted on a wall it throws light outward and down to mark a doorway or path, while ceiling mounting gives a flat, all-round spread for a passage or covered area. The 3120 lumen output covers the kind of approach, landing or service space where you want dependable visibility without glare, and the neutral 4000K tone keeps surfaces and signage looking clear. As a guide, position it at standard door-head or soffit height so the beam reaches the ground without dazzling.
The body is moulded plastic in a white finish, sealed to IP65 so it copes with rain, hosing and dust in fully exposed positions, and rated IK10 for strong resistance to knocks and vandalism. It runs direct from mains AC with the driver built in, so there is no separate transformer to source, and it carries a rated lifespan of around 50,000 hours. Both wall and ceiling mounting are supported via the fixing points on the rear, and the fitting is not dimmable. The wider Iper LED range includes further wattages and sizes in the same sealed format for matching a run of fittings.
Specification
| Power |
26W |
| Voltage |
220-240 AC |
| Luminous flux |
3120 lm |
| Efficiency |
120 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP65 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted, Wall Mounted |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
260 × 260 × 55 mm |
| Weight |
742 g |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
Can this bulkhead be used outdoors?
Yes. It is rated IP65, which means it is fully weatherproof and protected against rain, hosing and dust. It is suitable for exposed outdoor positions such as porches, doorways and car parks, as well as damp indoor areas like garages and plant rooms.
Does it take a separate bulb?
No. The Iper LED has an integrated LED light source rather than a replaceable lamp, so there is nothing to fit or change. It runs direct from a 220-240V AC mains supply with the driver built in.
Can it be fitted to a ceiling as well as a wall?
Yes. The fitting supports both wall and ceiling mounting through the fixing points on the rear. Wall mounting throws light outward and down a surface, while ceiling mounting gives a flat all-round spread for passages and covered areas.
How do I clean the fitting?
Wipe the white plastic body and diffuser with a soft, damp cloth once the unit is switched off and cool. Avoid abrasive pads or solvents, which can dull the surface. The IP65 seal means it can be cleaned in place even in exposed outdoor positions.