Iper 200x200 19W LED Bulkhead (19W) IP65 IK10 - White

The Iper is a square LED bulkhead drawing 19W and putting out 2280 lumens at a neutral 4000K, with a wide 120 degree spread that washes a wall or ceiling evenly rather than throwing a tight beam. Buyers in the US will recognise this format as an outdoor wall pack or wall sconce, the kind of robust fitting that sits flush against a wall or overhead and lights an approach without fuss. The integrated LED runs at 120 lm/W, so the output stays generous for the wattage, and the body measures 200 by 200 by 55mm.

Its IP65 rating and IK10 impact resistance make it a fit for fully exposed outdoor positions as well as damp and knock-prone indoor ones: external walls, porches, entrances, car parks, stairwells, plant rooms and communal corridors. The 120 degree beam and 2280 lumen output mark out a doorway, a flight of steps or a stretch of path clearly, and the neutral 4000K tone keeps signage and surfaces easy to read. It mounts equally on a wall or a ceiling, so it can be placed at head height beside a door or fixed overhead in a passage where a side fitting would be in the way.

Construction is a white plastic housing rated IK10, meaning it withstands heavy impact, paired with the IP65 seal that keeps out dust and driven rain. The LED is integrated and rated for 50,000 hours, so there is no bulb to replace over its life, and the fitting is not dimmable. The white square finish suits both functional utility settings and tidier residential frontages. The wider Iper range includes further wattages in the same square format for matching a run of entrances or corridors.

Can it be used outdoors?

Yes. The Iper carries an IP65 rating, which seals it against dust and water jets, so it is suitable for fully exposed outdoor walls and ceilings as well as porches and entrances. It is equally at home in damp indoor areas such as stairwells and plant rooms.

Does it take a separate bulb?

No. The LED is integrated into the fitting and rated for 50,000 hours, so there is no E27 or other lamp to source or replace. When the unit reaches the end of its life the whole fitting is changed rather than a bulb.

Where is this bulkhead typically used?

It suits entrances, porches, external walls, car parks, communal corridors and stairwells, plus knock-prone utility spaces like plant rooms and garages. The IK10 rating means it stands up to impact in busy or exposed locations, and the 120 degree spread covers an approach or a flight of steps.

How do I clean it?

Wipe the white housing and diffuser with a soft damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents that could scratch or dull the plastic. Make sure the fitting is switched off and cool before cleaning.