INVO TR 77cm 3.5W GU10 Bollard Light - Anthracite

The INVO TR is a free-standing garden bollard light that stands 770mm tall on a base-fixed mounting, giving low, directed light along a path, drive or border. It carries three GU10 lamp holders, each taking a PAR16 lamp up to 3.5W, so the head can hold up to 3 x max 3.5W in total. Across the Atlantic this form is usually called a pathway light, and the principle is the same: a short ground-standing post that washes light down and outward rather than up into the eyeline. It runs on 220 to 240V AC mains.

Set this bollard where you want a clear edge to a route after dark, such as the run of a front path, the line of a driveway, the corners of a patio or the planted edge of a border. Because the three heads sit at the top of the post, the light falls in pools close to the fitting and marks the way underfoot rather than flooding a wide area, so it works best spaced in a series along a walkway. The throw is modest and aimed downward, which keeps glare low for anyone walking past. It is a ground-standing post, not a wall fitting, so plan its position before fixing the base.

The body is moulded plastic in an anthracite finish, which suits dark garden hardware and modern house fronts. It holds an IP54 rating, making it splash-resistant and suited to sheltered outdoor spots such as a porch, covered patio or carport, though it should be kept clear of fully-exposed positions, direct water jets and standing water. Mounting is surface-fixed through the base, and the three GU10 lamps are user-replaceable, so output and colour temperature can be changed by choosing the lamp. The wider Invo bollard range offers further heights and head counts for matching a scheme across a garden.

Product Specification Sheet

Range Datasheet

Can the INVO TR be used outdoors?

Yes, within limits. Its IP54 rating makes it splash-resistant and suited to sheltered outdoor positions such as a porch edge, covered patio or carport. Keep it out of fully-exposed spots, direct water jets and standing water.

Is it base-fixed or staked into the ground?

It is surface mounted, meaning the base is fixed down onto a solid surface such as paving or a prepared pad rather than pushed into soil on a spike. This gives a stable, level post for a path, drive or border edge.

Does it take a replaceable bulb or have an integrated LED?

It uses replaceable lamps, taking three GU10 PAR16 lamps of up to 3.5W each. Because the lamps are not fixed, you can swap them to change the brightness or colour temperature, and replace any one that fails without changing the fitting.

How should I space these along a path?

Each bollard throws light downward in pools close to the post rather than across a wide area, so they work best set in a series. Position them at regular intervals along the route, with the post height of 770mm in mind, so the lit pools overlap and mark a continuous edge.