INVO OP 107 20W E27 Bollard Light - Anthracite

The INVO OP 107 is a free-standing outdoor bollard light that stands 1070mm tall on the ground rather than fixing to a wall. It takes a single E27 lamp up to 20W, so the brightness and colour temperature are set by the bulb you choose, whether a GLS, CFL or LED type. In the United States this style is usually called a pathway or path light, marking the edge of a route with a steady column of light close to ground level. Its slim 220 x 220mm footprint sits neatly in a border or alongside a path without taking up much space.

Standing just over a metre high, the INVO OP 107 suits garden paths, driveway edges, planted borders and defined outside zones such as a seating area or front-door approach. A run of bollards spaced evenly along a path gives a clear, repeated marker line rather than flooding a wide area, so think of it as guiding movement along a route rather than lighting a whole space. The light it gives depends on the lamp fitted, which lets you set a soft warm glow for a relaxed border or a brighter output near a step or gate. Spacing several units at regular intervals keeps the path read clearly from one end to the other.

The post is built from plastic in an anthracite finish that blends into planting and hard landscaping. It carries an IP54 rating, making it splash-resistant and suited to sheltered and covered outdoor spots such as a porch surround or carport edge, though it should be kept clear of direct water jets and exposed open ground. The fitting is surface mounted, sitting on its base on a path, paved area or border, and runs on a 220-240V AC mains supply through its E27 lampholder. Other heights and matching styles sit within the wider Invo range for a consistent look across a garden scheme.

Product Specification Sheet

Range Datasheet

Can it be used outdoors?

Yes, the INVO OP 107 carries an IP54 rating, so it is splash-resistant and built for sheltered or covered outdoor spots such as a porch, carport or planted border. Keep it clear of direct water jets and fully exposed positions, as IP54 is not rated for those conditions.

How is it fixed in place?

It is a surface-mounted, ground-standing post that sits on its base on a path, paved area or border rather than fixing to a wall. The 220 x 220mm base gives it a stable footprint, and at 1070mm tall it marks a route at a comfortable low level.

Does it come with a bulb, and is it dimmable?

The fitting takes a single E27 lamp up to 20W, which is not included, so you can choose a GLS, CFL or LED bulb to suit. Dimming depends entirely on the lamp fitted, so pick a dimmable LED bulb and a compatible dimmer if you want adjustable brightness.

How many should I use along a path?

Bollards work best spaced at regular intervals so the light reads as a continuous guiding line along a path, drive or border. Even spacing matters more than raw brightness, so place units at consistent gaps to mark the full length of a route clearly.