Description
A small round spot that sits neatly into the ceiling, this one drops into a 35mm cut-out and takes up very little room above. The LED is built in and draws 7W, giving a neutral 4000K white that reads clean and slightly crisp against pale plaster and white paint. The beam is tight rather than broad, so the light lands where you aim it instead of washing across everything. Its driver is supplied, and it is not dimmable, so a plain switch is the right control for it.
We reach for fittings this size where a full-size downlight would look heavy: under kitchen wall units, inside a shallow alcove, above a run of open shelving, or picking out the edge of a stair. It is rated against splashes and dust, so it can go into a bathroom ceiling or a sheltered porch as well as ordinary dry rooms. The narrow spread suits accent work, which means a line of them along a worktop or a picture wall will do far more than the same fitting used alone.
The visible parts are finished in white, so the trim reads quietly into a white ceiling and only the light itself is noticed. It is double insulated. To clean, switch off at the wall, wipe the rim with a barely damp cloth, and keep polish and solvents well away from the lens. It carries a three year warranty. We stock the same fitting in black, and in warmer white versions where you want a softer light for bedrooms and sitting rooms, so a whole house can be done in one shape with the tone changed room by room. The LED is integral, so there is no lamp to buy for it.
Specification
| Colour |
White |
| Weight |
0.14KG |
| Diameter |
42mm |
| Height |
62mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
4000K Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
20° |
| System Flux |
571lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
It produces 571 lumens from 7W, with a colour rendering index of 90 or above, so colours and skin tones hold up well under it.
What size hole does it need?
The cut-out is 35mm. The fitting measures 42mm across the trim and 62mm deep behind it.
Can it be dimmed?
No. It is a non-dimmable fitting and should be run from a standard on/off switch. Fitting it to a dimmer circuit can cause flicker and shorten its life.
Is it suitable for a bathroom?
It is IP54 rated, so it is protected against dust and splashing water and is suited to bathroom ceilings outside the direct spray zones.
How wide is the beam?
The beam angle is 20 degrees, which is a narrow, directional pool of light rather than general room lighting. Space several across an area if you want even coverage.
Does it need a separate driver?
No, the driver is included with the fitting.