Description
A small recessed downlight with a white face, set into the ceiling so that little more than a neat ring is left on show. The LED is built in and runs at 7W, with its driver supplied, and the light it gives is warm at 3000K, closer to the tone of a filament lamp than to daylight. The beam is a narrow one, so it drops a defined pool of light rather than washing a whole room evenly. It is not dimmable, so pair it with an ordinary switch.
We reach for a fitting this small where a full-size downlight would sit too heavy: a run above a worktop, a line down a hallway ceiling, light into alcoves and open shelving, or a tight beam aimed at a picture. The body is sealed well enough to shrug off dust and splashing water, which brings bathrooms, shower rooms, kitchens and utility rooms into range alongside dry living space. A 35mm cut-out keeps the ceiling largely intact, and the shallow depth suits ceilings where there is not much room to play with. The fitting is double insulated.
The visible ring is finished in white, which disappears into painted plaster more readily than any metal tone. Cleaning asks very little: with the power off and the fitting cool, run a soft cloth around the rim now and then, and keep household sprays away from the face so the finish stays even. It carries a three year warranty. We stock the same downlight in black for ceilings where a dark aperture is wanted, and in warmer and cooler light tones if this one sits slightly off the mood of the room. Because the LED is part of the fitting, there is no lamp to buy or change.
Specification
| Colour |
White |
| Weight |
0.14KG |
| Diameter |
42mm |
| Height |
62mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
20° |
| System Flux |
571lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How big a hole does it need?
The cut-out is 35mm. The fitting itself measures 42mm across the face and 62mm deep.
What sort of light does it give?
571 lumens at 3000K, a warm white, from a 7W integrated LED with a narrow 20 degree beam.
Can I dim it?
No. This version is non-dimmable and should be run from a standard switch.
Is it suitable for a bathroom?
It is rated IP54, so it is protected against dust and splashing water and is suitable for bathrooms and shower rooms within the appropriate zones.
Does it need a separate driver?
No, the driver is supplied with the downlight.
How good is the colour rendering?
CRI is 90, so skin tones, food and paint colours read accurately under it.