Description
This is one of the smallest recessed lights we sell, a neat black ring set into the ceiling with the light source held back inside it. The beam is narrow and directional rather than broad, so it reads as a pool of light on a worktop or a wall rather than a general wash. The LED is built in and runs at 7W, with the driver supplied alongside it, and the colour is a warm white 3000K that keeps timber, stone and paint looking soft. It is not dimmable, so it is best wired to a plain switch or grouped on a circuit you are happy to run at full output.
We reach for a light this size where a standard downlight would look heavy: over a run of shelving, along the edge of a hallway ceiling, above a basin, or picking out a splashback. The 35mm cut-out means several can run in a line without the ceiling starting to look busy. It is sealed against splashes and steam, which makes it a sensible choice for bathrooms, shower rooms and utility spaces as well as kitchens. If you want a cooler, crisper light for a work area, we stock the same fitting in other colour temperatures.
The body is compact and finished in black throughout, including the visible trim, so it sits quietly against a dark ceiling and reads as a deliberate detail against a pale one. There is no lamp to change here; the LED and its driver are matched as one unit. To keep it looking right, turn the power off at the switch and wipe the trim with a barely damp cloth, avoiding solvents and cream cleaners that would dull the finish. It carries a three year warranty. We also stock this range in white if you would rather the fitting disappeared into the plaster line altogether.
Specification
| Colour |
Black |
| Weight |
0.14KG |
| Diameter |
42mm |
| Height |
62mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
20° |
| System Flux |
571lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
It is made for a 35mm cut-out. The fitting itself measures 42mm across the trim and 62mm deep.
How much light does it give?
571 lumens from 7W, at 3000K warm white. Because the beam is tight at 20 degrees, that output lands as a concentrated pool rather than spreading across the room.
Can I put it on a dimmer?
No. This version is non-dimmable and should be run from a standard on/off switch.
Is it suitable for a bathroom?
Yes. It is IP54 rated, so it copes with splashes and steam in bathrooms, shower rooms and utilities.
Do I need to buy a driver or a lamp?
Neither. The LED is integrated and the driver is included with the fitting.
What other options are in the range?
The same fitting is offered in white as well as black, and in 2700K and 4000K alongside this 3000K version.