Description
A small recessed spotlight with a white trim, sized to read as a neat circle of light rather than as a piece of hardware. The LED sits behind the aperture and draws 7W, giving a warm 2700K light that leans golden rather than crisp. The beam is narrow, so it picks out a surface, a shelf or an object instead of washing a whole room evenly. Its driver comes with it, and the fitting is non-dimmable, so it is happiest on a plain switch.
The 35mm cut-out is the point of it. Where a wider aperture would look heavy, this one keeps the ceiling quiet, which makes it useful in hallways, over a worktop, under a run of shelving or picking out a chimney breast. It is protected against splashes, so it also works on bathroom and shower room ceilings away from direct spray. We tend to reach for it in tight ceilings and small rooms where a big six inch downlight would dominate, and we would set them in an even line rather than dotting them about. It suits anyone after light with almost nothing to look at.
The housing is finished in a clean white that disappears against most painted ceilings, and the fitting is double insulated. It carries a three year warranty. For cleaning, turn the power off and go over the visible rim with a dry cloth; skip solvents and scouring pads, which will dull the paint. The LED is permanent, so there is no lamp to buy or change over its life. We also stock this one in black, and in cooler colour temperatures across the same range, which is handy if you want warm light in the bedrooms and something brisker in the kitchen while keeping every aperture identical.
Specification
| Colour |
White |
| Weight |
0.14KG |
| Diameter |
42mm |
| Height |
62mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
20° |
| System Flux |
571lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 35mm. The fitting itself measures 42mm across the trim and 62mm deep.
How bright is it?
It gives 571 lumens from 7W, at 2700K warm white, in a tight beam.
Can it be dimmed?
No, this version is non-dimmable and should be run from a standard switch.
Can the LED be replaced?
No, the LED is integrated. When it eventually reaches the end of its life the whole fitting is changed.
Is it suitable for a bathroom?
Yes. It is IP54 rated, so it copes with splashes and steam on a bathroom ceiling away from direct spray.
Do I need to buy a driver?
No, the driver is supplied with the fitting.