Description
This is a small black downlight built for tight, tidy ceilings, with an integrated LED behind a slim black trim. It draws 7W and gives a warm white 2700K light, closer to the tone of a filament lamp than to daylight. The beam is narrow rather than broad, so light lands where it is aimed instead of washing across everything. A driver comes with it. It is switched rather than dimmed, which keeps things simple where a plain wall switch is all the room has.
We reach for fittings this size when a standard downlight would look heavy: shallow ceilings, alcoves, the run above a kitchen worktop, a narrow hallway that needs light in a straight line. The 35mm cut-out is discreet enough for a bathroom ceiling or an en suite, and the fitting is sealed against splashes and dust for those rooms. Used in a row, the tight beam gives pools of light with shadow between them, which suits a corridor or a display shelf better than a broad flood would.
The black finish carries across the visible trim, so the fitting reads as a dark circle rather than a bright ring against a painted ceiling. Cleaning asks little: cut the power at the switch, take dust off the trim with a dry cloth, and lift marks with a barely damp one, keeping solvents and scouring pads away from the finish. It runs on an ordinary household supply and is double insulated. It carries a three year warranty. The LED is built in, so there is no lamp to change. We stock the same fitting in white, and in cooler colour temperatures if warm white is not the tone you want.
Specification
| Colour |
Black |
| Weight |
0.14KG |
| Diameter |
42mm |
| Height |
62mm |
| Cut Out |
35mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
82lm/W (±5%) |
| Beam Angle |
20° |
| System Flux |
571lm (±5%) |
| CRI |
=90 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
It produces 571 lumens from 7W, with a colour rendering index of 90 or above, so colours and skin tones look true.
How wide is the beam?
It is a 20 degree beam, which is tight and directional. Aim it at a worktop, a basin or a picture rather than expecting it to light a whole room on its own.
Can I put it on a dimmer?
No. This version is non-dimmable, so it needs a plain on/off switch circuit.
What size opening does it need, and how deep is it?
The cut-out is 35mm, the trim measures 42mm across, and the body stands 62mm tall.
Is it suitable for a bathroom?
It is rated IP54, which covers dust and splashing water, so it is at home in bathroom and en suite ceilings outside direct spray.
Does it need a separate driver?
No, the driver is supplied with the fitting.