Description
This GU10 LED spotlight bulb is a directional mains lamp that twists straight into a standard GU10 holder, running on 220 to 240V AC with no transformer needed. It draws just 7W while standing in for an old 60W bulb, giving 575 lumens of crisp 4000K cool white light. The 110 degree beam is wider than a typical narrow spot, so the light spreads evenly rather than pooling in a tight circle, and the dimmable driver lets you take the output up or down to suit the time of day. In the US this PAR16 reflector lamp answers to the bi-pin GU10 fitting common in track and recessed cans.
Cool white at 4000K reads clean and neutral, which makes this bulb a sensible choice for kitchens, home offices, hallways and living spaces where you want clear, accurate light rather than a warm glow. The wide 110 degree beam suits general accent and fill duties, washing a worktop, shelf or seating area rather than picking out a single object the way a 24 degree spot would. With Ra 95 colour rendering, finishes, food and fabrics show their true tone. Because suitability for damp or outdoor positions depends on the fitting and not the bulb, keep this lamp to dry indoor locations only.
The lamp measures just 50mm across and 57mm long, the standard GU10 reflector footprint, and weighs 40g, so it drops into existing downlights and track heads without adjustment. The integrated LED is rated for 25,000 hours and reaches 82 lm/W, and the GU10 cap means mains voltage with no separate driver to source. It is fully dimmable on a compatible trailing-edge dimmer, and the housing is finished in silver. This bulb sits within our wider GU10 range, with warm white and fixed-output versions available alongside this dimmable cool white model.
Specification
| Cap / fitting |
GU10 twist-lock |
| Bulb shape |
Spotlight |
| Power |
7 W |
| Replaces |
60 W incandescent |
| Luminous flux |
495 lm |
| Efficiency |
71 lm/W |
| Colour temperature |
4000K (Cool White) |
| Colour rendering (CRI) |
Ra 95 |
| Beam angle |
110° |
| Dimmable |
Yes |
| Rated life |
25000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has a GU10 twist-lock cap, the standard mains-voltage spotlight fitting found in most downlights and track heads. You simply push it in and twist a quarter turn to lock it. Because it is GU10 and not a GU5.3 MR16, it runs directly off the mains and needs no transformer or separate driver.
What old bulb wattage does it replace?
The LED draws only 7W itself but produces 575 lumens, enough to replace a 60W halogen or incandescent GU10 spotlight. You get the same brightness for a fraction of the running cost, and the lamp is rated for 25,000 hours of use.
Is this bulb dimmable?
Yes, it is fully dimmable. For smooth, flicker-free dimming use a compatible LED dimmer, ideally a trailing-edge type. Pairing it with the right dimmer module gives the best low-end performance.
What is the beam angle and light colour?
It has a wide 110 degree beam, broader than a typical narrow spotlight, so it spreads light across an area rather than pinpointing one object. The colour is 4000K cool white, a clean neutral tone, and with Ra 95 colour rendering it shows colours and finishes accurately.