Glasi 3W Recessed LED Wall Light Cool White - White

The Glasi is a recessed LED wall light that sits flush into the wall to mark walls, hallways and thresholds with a low-level glow. It draws 3W and produces 140 lumens at a 4000K cool white tone, spreading the light across a wide 120 degree beam so the output washes softly rather than spotting a single point. North American buyers searching for an outdoor wall sconce or a recessed wall pack will find the same role here, with the fitting set into the wall face instead of mounting proud of it. Built around an integrated LED rated for 30,000 hours, it needs no replaceable bulb.

The IP44 rating makes the Glasi a fit for sheltered and splash-prone positions: bathroom zones away from direct spray, plus covered outdoor spots such as a porch, carport or recessed entrance wall. It is not intended for fully exposed positions, direct water jets or submersion, so keep it clear of open weather and pooling water. Rather than lighting a whole room, this fitting handles orientation and accent work, grazing a stair flank, edging a corridor or marking a doorway, so coverage is best judged by the run of fittings rather than a floor area. The cool white 4000K tone keeps stair edges and steps clearly defined.

The body is aluminium alloy in a white finish, measuring 105 by 80 by 42 mm and weighing 254 g, with a rectangular face that recesses neatly into the wall. It runs on 220 to 240V AC mains and is not dimmable, so it is best paired with a standard switched circuit. The colour rendering sits at Ra 80, giving honest tones across walls and finishes. This recessed format is part of the wider Glasi range, which also includes a warm white version for those preferring a softer tone.

Can the Glasi be used outdoors?

Its IP44 rating suits sheltered and splash-prone positions, so a porch, carport or covered entrance wall is fine. Keep it clear of fully exposed locations, direct water jets and standing water, as IP44 covers splashing rather than driving rain or submersion.

Does it take a replaceable bulb?

No, the Glasi uses an integrated LED rated for 30,000 hours, so there is no bulb to fit or change. The whole fitting is replaced at end of life rather than re-lamped.

Where is this fitting typically used?

It is well suited to hallways, stairwells, corridors and sheltered entrances, where it marks edges and thresholds with a low glow. The recessed format sits flush in the wall, so it is ideal where a surface-mounted fitting would protrude into a walkway.

How should the Glasi be cleaned?

Wipe the face with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents on the white aluminium finish, and switch the fitting off and let it cool before cleaning.