Description
The Garto is a compact outdoor wall light that fixes flat against an exterior wall and throws light both up and down for a twin-beam façade effect. It draws 8W and gives 350 lumens at a 4000K neutral white tone, with an integrated LED rather than a replaceable bulb. In US terms this is an outdoor wall sconce, a small up-down fitting for the front of a house or an entrance. The rectangular aluminium body measures 115 x 30 x 90 mm and sits close to the wall, with the two beams grazing the surface above and below.
The Garto works well by a front door, beside a garage, along a porch or under a carport, where its split beam washes the wall and marks the threshold without flooding the whole area. Rather than lighting a room, it picks out the wall plane and gives a clear sense of arrival, so it suits placement at roughly head height beside entrances or spaced along a longer run of wall. Its 350 lumens are aimed at accent and wayfinding rather than broad illumination, so pair it with a brighter fitting if you need to light a full driveway or path.
Built from aluminium alloy in a white finish, the Garto is rated IP54, which means it is splash-resistant and suited to sheltered and covered positions such as a porch, carport or recessed doorway rather than fully exposed spots facing direct rain or jets of water. It runs on 220-240V AC mains, is wall mounted and is not dimmable, with a rated lifespan of 25,000 hours. The fitting weighs 400 g and stays close to the wall thanks to its slim 30 mm depth. Other finishes and forms in the Garto outdoor wall range let you keep a consistent look across a frontage.
Specification
| Power |
8W |
| Voltage |
220-240 AC |
| Luminous flux |
350 lm |
| Efficiency |
44 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| IP rating |
IP54 |
| Dimmable |
No |
| Mounting |
Wall Mounted |
| Lifespan |
25,000 hours |
| Shape |
Rectangular |
| Dimensions |
115 × 30 × 90 mm |
| Weight |
400 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can the Garto be used outdoors?
Yes, within limits. It carries an IP54 rating, which makes it splash-resistant and suitable for sheltered and covered outdoor spots such as a porch, carport or recessed entrance. Keep it out of fully exposed positions that face driving rain or direct water jets.
How does the up-and-down light effect work?
The Garto has openings at the top and bottom of its body, so light is thrown both upward and downward against the wall it is fixed to. This grazes the surface and creates a twin-beam façade effect, picking out the wall plane rather than lighting a whole area.
Does it take a replaceable bulb?
No, the Garto uses an integrated LED, so there is no separate bulb to fit or change. It gives 350 lumens at 4000K neutral white and is rated for around 25,000 hours of use, after which the whole fitting is replaced.
How high should it be mounted?
For an entrance or front wall, mounting at roughly head height works well, as it lets both beams graze the wall above and below the fitting. Along a longer run of wall, space several units evenly to keep the lit pools consistent.