Description
This G95 globe light bulb puts visible LED filaments inside clear glass, giving the vintage look of an old incandescent in a low-energy form. It draws 10.5 W yet replaces a 100 W traditional bulb, putting out 1521 lumens at 4000K cool white. The wide 320 degree beam spreads light evenly all around the bulb, and the large 95 mm globe shape suits open fittings where the lamp is meant to be seen. US buyers will know this size as a G95 decorative globe on a standard E27 screw cap.
The E27 Edison Screw (ES) cap fits the usual screw-in pendants, table lamps and exposed bracket fittings found across living rooms, hallways, bedrooms and dining areas. With its filament detail on show, it works best in clear-shade or bare-holder fittings where the glass is visible rather than hidden behind a dense diffuser. Because it is rated IP20 it is for dry indoor use only, so keep it clear of bathrooms, porches and any outdoor or damp location. The cool white tone gives a crisp, neutral light that reads well over kitchen tables and work-adjacent spaces.
The lamp uses LED filament technology rated to Ra 80 colour rendering, with an efficiency of 145 lm/W and a rated life of 25,000 hours. It runs on 220 to 240 V AC mains directly through the E27 cap, with no transformer or driver required. This bulb is non-dimmable, so pair it with a standard on/off circuit rather than a dimmer switch. It measures 95 mm in diameter by 140 mm long, weighs 58 g and has a transparent glass finish that shows the filaments clearly.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
Globe (filament) |
| Power |
10.5 W |
| Replaces |
100 W incandescent |
| Luminous flux |
1521 lm |
| Efficiency |
145 lm/W |
| Colour temperature |
4000K (Cool White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
No |
| Rated life |
25000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has an E27 Edison Screw (ES) cap, the larger of the two common screw fittings. It screws straight into any standard E27 holder, such as a pendant, table lamp or exposed bracket fitting.
What old bulb wattage does it replace?
The LED itself draws only 10.5 W but gives 1521 lumens, enough to replace a 100 W traditional incandescent globe. You get the same brightness for a fraction of the running cost.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It should be used on a standard on/off switch rather than a dimmer circuit, as dimming may cause flicker or shorten its life.
What does the cool white tone look like?
At 4000K it gives a crisp, neutral cool white that sits between warm and daylight. Combined with the visible filaments it suits kitchens, dining areas and feature fittings where a clear, bright light is wanted.