Free Delivery on all orders over £99*

G125 11W Filament Globe LED Bulb E27 - Cool White

£899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This G125 globe is a large decorative LED bulb on an E27 Edison Screw (ES) cap, built around visible LED filaments behind clear glass for a vintage look. It draws just 11W while putting out 1520 lumens, standing in for a 99W old bulb at a fraction of the power. The tone is 4000K cool white, a crisp, clean light, and the wide 320 degree beam spreads it evenly all around the bulb rather than in one direction. In US terms this is a large globe lamp on a standard screw base.

Because of its size and the exposed filament detail, the G125 suits fittings where the bulb is on show: open pendants over a kitchen island or dining table, a bare-bulb wall light, or a multi-arm chandelier where each lamp reads as part of the look. It is an indoor bulb only, rated IP20, so keep it out of bathrooms, porches and any damp or outdoor spot. The 320 degree spread and 1520 lumen output give a bright, glare-aware glow that works well as a focal feature as much as a light source, with the cool white tone keeping the filaments looking sharp.

The bulb measures 125 mm in diameter by 178 mm tall and weighs 102 g, so allow room in larger open shades and pendants. It runs on 220 to 240V mains AC straight from the E27 holder with no driver to add. CRI is Ra 80 and rated life is 15,000 hours. This is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer. Our wider E27 filament range covers smaller globe and candle shapes if you need to match several fittings.

Specification
Cap / fitting E27 Edison Screw (ES)
Bulb shape Globe (filament)
Power 11 W
Replaces 99 W incandescent
Luminous flux 1520 lm
Efficiency 138 lm/W
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 80
Dimmable No
Rated life 15000 hours
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Which fitting does this bulb need?

It has an E27 Edison Screw (ES) cap, the larger of the two common screw fittings. It twists straight into any standard E27 lampholder and runs on 220 to 240V mains, so no transformer or driver is needed.

What old bulb wattage does it replace?

The LED itself draws only 11W but gives 1520 lumens, which matches the brightness of a 99W old incandescent bulb. You get close to the same light for around a ninth of the power.

Is this bulb dimmable?

No, it is non-dimmable. Use it with a standard on/off switch. Fitting it to a dimmer circuit can cause flicker or shorten its life, so it is best kept off dimmed lines.

Can I use it outdoors or in a bathroom?

No. It is rated IP20 for dry indoor use only, so it is not suitable for bathrooms, porches, gardens or any damp location. Keep it to enclosed indoor fittings such as pendants, wall lights and chandeliers.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard E27 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This G125 globe is a large decorative LED bulb on an E27 Edison Screw (ES) cap, built around visible LED filaments behind clear glass for a vintage look. It draws just 11W while putting out 1520 lumens, standing in for a 99W old bulb at a fraction of the power. The tone is 4000K cool white, a crisp, clean light, and the wide 320 degree beam spreads it evenly all around the bulb rather than in one direction. In US terms this is a large globe lamp on a standard screw base.

    Because of its size and the exposed filament detail, the G125 suits fittings where the bulb is on show: open pendants over a kitchen island or dining table, a bare-bulb wall light, or a multi-arm chandelier where each lamp reads as part of the look. It is an indoor bulb only, rated IP20, so keep it out of bathrooms, porches and any damp or outdoor spot. The 320 degree spread and 1520 lumen output give a bright, glare-aware glow that works well as a focal feature as much as a light source, with the cool white tone keeping the filaments looking sharp.

    The bulb measures 125 mm in diameter by 178 mm tall and weighs 102 g, so allow room in larger open shades and pendants. It runs on 220 to 240V mains AC straight from the E27 holder with no driver to add. CRI is Ra 80 and rated life is 15,000 hours. This is a non-dimmable bulb, so pair it with a standard on/off switch rather than a dimmer. Our wider E27 filament range covers smaller globe and candle shapes if you need to match several fittings.

    Specification
    Cap / fitting E27 Edison Screw (ES)
    Bulb shape Globe (filament)
    Power 11 W
    Replaces 99 W incandescent
    Luminous flux 1520 lm
    Efficiency 138 lm/W
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 80
    Dimmable No
    Rated life 15000 hours
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Which fitting does this bulb need?

    It has an E27 Edison Screw (ES) cap, the larger of the two common screw fittings. It twists straight into any standard E27 lampholder and runs on 220 to 240V mains, so no transformer or driver is needed.

    What old bulb wattage does it replace?

    The LED itself draws only 11W but gives 1520 lumens, which matches the brightness of a 99W old incandescent bulb. You get close to the same light for around a ninth of the power.

    Is this bulb dimmable?

    No, it is non-dimmable. Use it with a standard on/off switch. Fitting it to a dimmer circuit can cause flicker or shorten its life, so it is best kept off dimmed lines.

    Can I use it outdoors or in a bathroom?

    No. It is rated IP20 for dry indoor use only, so it is not suitable for bathrooms, porches, gardens or any damp location. Keep it to enclosed indoor fittings such as pendants, wall lights and chandeliers.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.