Description
This E27 globe LED bulb is a large decorative G125 lamp with visible LED filaments behind clear glass, giving the vintage look of an old incandescent globe while drawing just 11W. It fits the standard E27 Edison Screw (ES) holder, which buyers in the US will recognise as the medium screw base. The bulb puts out 1520 lumens at 2700K, a warm white tone that suits the slow, amber glow people expect from a feature globe, and its wide 320 degree beam angle spreads light evenly all the way around the glass.
Because it spreads light in almost every direction rather than throwing a focused beam, it works as an exposed feature bulb where the lamp itself is part of the look: open pendants over a kitchen island or dining table, bare-cable fittings in a hallway, or a row of holders along a bar or living room shelf. The 125mm diameter sphere makes it a deliberate decorative choice rather than a hidden source, so it earns its place under a clear shade or in a pendant with no diffuser. As an IP20 lamp it is for dry indoor rooms only, so keep it clear of bathrooms, porches and any outdoor or damp location.
The G125 shape measures 125mm across and 178mm tall and weighs 102g, with the filament strands set inside clear glass for the classic appearance. It runs on 220 to 240V mains AC straight from the E27 holder with no separate driver, delivers a CRI of Ra 80 and is rated for 15,000 hours at an efficiency of 138 lm/W. This bulb is non-dimmable, so pair it with a standard on/off switch rather than a dimmer. The 11W LED is rated to replace a 99W old bulb, so it gives that high-output globe brightness for a fraction of the running cost. The wider E27 globe range covers other sizes and shapes on the same screw cap.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
Globe (filament) |
| Power |
11 W |
| Replaces |
99 W incandescent |
| Luminous flux |
1520 lm |
| Efficiency |
138 lm/W |
| Colour temperature |
2700K (Warm White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
No |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
What fitting does this bulb need?
It has an E27 cap, also called Edison Screw or ES, so it screws into any standard E27 holder. In the US this is the medium screw base. The bulb is a large G125 globe at 125mm across, so check your fitting and shade leave room for the size.
What old bulb wattage does it replace?
The LED itself draws only 11W but is rated to replace a 99W old incandescent globe. It produces 1520 lumens, so you get full feature-globe brightness while using a fraction of the power.
Is it warm or cool light?
It is 2700K warm white, a soft amber tone that matches the glow of a traditional filament bulb. With visible LED filaments behind clear glass it suits relaxed, decorative settings like dining areas, hallways and living rooms.
Is this bulb dimmable?
No, this is a non-dimmable bulb, so use it with a standard on/off switch rather than a dimmer. Fitting it to a dimmer circuit can cause flicker or buzzing and may shorten its rated 15,000 hour life.