FL SONE 240x50 10W LED Bulkhead IP65 - Anthracite

The FL SONE 240x50 is a compact LED bulkhead built for outdoor walls, drawing up to 10W to deliver as much as 1200 lumens of 4000K neutral white light through a 90 degree spread. American buyers shopping for an outdoor wall pack or wall sconce will recognise the same low-profile, weatherproof format here. Running on a 3.2V DC supply, it lights an entrance, doorway or path edge with a broad, even wash rather than a tight beam, and at 120 lm/W it stays efficient across its rated life.

Its 90 degree spread suits the kind of jobs a bulkhead is asked to do: marking a back door, a garage side wall, a stairwell entrance or a stretch of boundary fence. Mounted at typical doorway or eaves height, the wide angle throws light down and across the immediate surface in front of it rather than projecting far, so it works as close-range surface and approach lighting where you want a clear, neutral-toned pool of light at the threshold. Several units spaced along a wall or fence run give continuous coverage for a longer path without leaving dark gaps.

The housing is moulded ABS rated to IP65, so it withstands rain, splashing and wet exposure on a fully open wall. It is surface wall mounted, measuring 243 x 46 x 282 mm and weighing 2.08 kg, with an integrated LED array rated for 25,000 hours that runs at a fixed 4000K rather than a replaceable bulb. The low 46 mm depth keeps it close to the wall face. Kanlux supplies this fitting as part of the wider FL SONE range of weatherproof outdoor lights.

Is it suitable for outdoor and wet locations?

Yes. The FL SONE 240x50 is rated IP65, which means it is protected against rain, splashing and water jets, so it can be fitted on a fully exposed outdoor wall as well as in sheltered positions. It is well suited to doorways, garages, paths and boundary walls.

Does it take a separate bulb?

No. This is an integrated LED bulkhead with the light source built in, rated for around 25,000 hours of use, so there is no E27 or other lamp to fit or replace. It runs on a 3.2V DC supply and gives out up to 1200 lumens at a fixed 4000K neutral white.

Where is this bulkhead typically used?

Bulkheads like this are common at back doors, garage walls, stairwells, communal entrances and along boundary or fence lines. The 90 degree beam casts a wide, even pool of light over the surface in front of it, making it a practical choice for marking thresholds and approaches rather than long-distance throw.

How do I clean it?

Wipe the lens and ABS housing with a soft, damp cloth to remove dust, cobwebs and outdoor grime that can dull the output over time. Avoid abrasive pads or solvent cleaners on the surface, and make sure the fitting is switched off and cool before cleaning.