Description
This black extension cable lengthens the run between two matching connectors, letting a fitting sit further away than its own lead would allow. It comes in three lengths, 1m, 5m and 10m, so you can pick the one that fits the distance you need to cover. One end carries a threaded male connector; the other carries a female connector with a round collar that screws onto a matching thread. Each connector has a ribbed sleeve where it meets the cable, and the cable itself is round, flexible and plain black from end to end.
Choosing the length is the main decision. The 1m cable bridges a short gap without leaving a loop of spare cable to tuck away. The 5m cable covers a middle distance, such as along a wall or between two fittings set some way apart. The 10m cable reaches furthest, for a fitting that needs to sit well away from the connector it joins. Before you order, set the connectors beside the ones on your own fittings: the threaded male end and the collared female end need to match them, and a quick look settles it. It suits anyone extending a set of fittings that already uses connectors of this kind.
A ribbed sleeve backs each connector, and the plain black finish keeps the cable discreet against dark surfaces. Use it as the manufacturer instructs, alongside the instructions that come with the fittings it joins. For care, wipe it with a soft dry cloth and coil it loosely rather than folding it tightly, with a tie around the coil when it is not in use. A spare length kept in a drawer is a practical standby for the day a fitting needs to move a little further away.
Specification
| Minimum order |
12 units, priced per unit |
Frequently Asked
What lengths does this extension cable come in?
It comes in three lengths: 1m, 5m and 10m. Choose the shortest one that covers your gap, so there is less spare cable to coil away.
What connectors are on each end of the cable?
One end has a threaded male connector. The other end has a female connector with a round collar that screws onto a matching thread. Each one has a ribbed sleeve where it meets the cable.
How can I tell if it will join my fittings?
Set its connectors beside the ones on your own fittings. The threaded male end and the collared female end need to match them before the cable can join them.
What colour is the cable?
The cable and both connectors are plain black, which keeps the run discreet against dark surfaces once it is laid in place.
How should I look after and store it?
Wipe it with a soft dry cloth when needed. When it is not in use, coil it loosely rather than folding it tightly, and keep a tie around the coil.