EXIN Ø80 2.5W LED Step Light IP65 Cool White - Black

The EXIN is a recessed LED step light built to mark steps, paths and low wall lines with a controlled wash of light. It draws 2.5W and puts out 50 lumens at a crisp 4000K cool white, running on a 220-240V AC supply. Round in form at just Ø80mm, it sits flush within the wall once installed. North American buyers will recognise the format as a recessed step or stair light, the small fixture set into a riser or low wall to guide footing after dark rather than to light a whole space.

The light suits outdoor steps, garden walls, porch returns and pathway edges where a discreet downward marker is wanted. With only 50 lumens it is designed to define an edge and pick out the next tread, not to flood an area, so think of it as low-level orientation and footing guidance rather than ambient lighting. Several units spaced along a flight or run give an even line of guidance, and because the body recesses into the wall it stays clear of knocks and keeps a clean face on the masonry. Its IP65 rating means it copes with exposed positions and wet weather, so it can be used on fully open external walls as well as sheltered ones.

The body is aluminium alloy in a black finish, with a round face measuring Ø80 by 48mm and a weight of 116g. The IP65 rating seals it against dust and water jets, making it dependable in rain-exposed outdoor settings. It mounts recessed into the wall, so a suitable opening is needed in the masonry or cladding to take the fitting. The integrated LED is rated for around 30,000 hours and the colour temperature is fixed at 4000K cool white. This fitting is not dimmable. The EXIN sits within a wider range of recessed markers from Kanlux, with matching outputs and finishes for consistent runs.

Can it be used outdoors and in wet locations?

Yes. The EXIN carries an IP65 rating, which protects it against dust and water jets from any direction. That makes it suitable for fully exposed outdoor walls and steps, including positions that take direct rain.

How is it installed?

It is a recessed fitting, so it sets flush into the wall rather than mounting on the surface. You will need a suitable opening in the masonry or cladding to take the Ø80mm body, which has a depth of 48mm. Once seated, only the round face is visible.

What colour of light does it give?

The EXIN produces a fixed 4000K cool white, a clean neutral tone that reads clearly against stone, brick and timber. The colour temperature is not adjustable, so plan runs around this single tone for a consistent line of light.

How should it be cleaned and maintained?

Wipe the face with a soft damp cloth to clear dust, grit and water marks, avoiding abrasive cleaners that could mark the lens or the black finish. The integrated LED is rated for around 30,000 hours, so there is no bulb to replace over its working life.