Erton 33W LED Downlight Recessed - White

The Erton is a recessed LED downlight that draws 33W and delivers 3670 lumens of integrated light at a neutral 4000K, giving a clean, even spread without a separate replaceable lamp. A 45 degree beam angle keeps the output reasonably focused, so the fitting works as directional ambient lighting rather than a wide wash. North American buyers would recognise this format as a recessed can light, dropped into the ceiling so only the round trim sits flush with the surface. With an efficiency of 111 lm/W and a colour rendering of Ra 90, colours and surfaces read accurately under it.

The fitting suits living rooms, hallways, kitchens and home offices where a tidy ceiling and an honest neutral-white tone matter. At general lighting levels a single unit covers around 12 m², so spacing several across a larger ceiling builds an even layer of light with no obvious hotspots or gaps. The 45 degree beam makes it a good fit over a worktop, dining area or seating zone where you want light brought down onto a defined spot. Plan the layout to the ceiling depth as well: the body sits 150 mm above the ceiling line, so check there is clearance in the void above before settling on positions.

Built from aluminium alloy in a white finish, the round body measures 190 mm across and runs on a standard 220 to 240V AC mains supply. It mounts recessed into the ceiling, sitting flush once installed, and is rated IP20 for dry indoor rooms only, so keep it clear of bathrooms, porches and any damp location. The fitting is not dimmable and is rated for 30,000 hours of use. The Erton range includes further wattages and sizes if you need to match this look across different rooms.

What cut-out size does the Erton need?

The fitting itself measures 190 mm in diameter, so the cut-out hole in the ceiling needs to be sized to the manufacturer's recess specification rather than the overall trim diameter. The body also extends 150 mm above the ceiling, so confirm there is enough depth in the void before cutting. Always check the cut-out figure on the spec sheet before drilling.

How many do I need for a room?

Each unit delivers 3670 lumens, which covers around 12 m² at general lighting levels. For a larger room, space several across the ceiling to build an even layer rather than relying on one bright point. The 45 degree beam suits placing them over defined zones such as worktops or seating areas.

Can the Erton be dimmed?

No, this version is not dimmable, so it runs at full output whenever it is switched on. If you need adjustable brightness, choose a dimmable fitting and a compatible dimmer instead. The neutral 4000K tone gives a bright, even light well suited to kitchens and work areas.

How do I clean the downlight?

Switch the fitting off and let it cool, then wipe the white trim and lens with a soft, dry or slightly damp cloth. Avoid solvents and abrasive cleaners, which can mark the aluminium finish. As it is rated IP20 for dry indoor use, never use running water or wet cloths that could let moisture into the fitting.