ENELO 24W LED Bulkhead - White

The ENELO is a round LED bulkhead drawing 24W and putting out 2200 lumens at a neutral 4000K white, with a wide 120 degree spread that washes a wall or ceiling evenly rather than throwing a tight beam. American buyers will recognise this surface fitting as a wall pack or outdoor wall sconce, the kind used to keep a doorway or stair landing lit. Running on 220-240V AC mains and rated to 80 CRI, it gives a clean, practical light from a 380mm diameter body that sits just 50mm proud of the surface.

The bulkhead suits porches, carports, covered walkways and entrance halls, as well as bathroom zones away from direct spray, thanks to its IP44 splash rating. It works on both walls and ceilings, so it can mark a back door, a stairwell or a utility room with equal ease. The 120 degree beam and 2200 lumen output give broad, glare-free coverage close to the surface, marking a threshold or passage clearly rather than lighting a whole room from height. Keep it to sheltered and covered positions rather than fully exposed sites or anywhere subject to direct water jets.

Built from metal with a white finish, the ENELO mounts directly to the surface and runs straight from mains voltage with no separate transformer to specify. It is a non-dimmable fitting with an integrated LED rated for around 20,000 hours, so there is no bulb to change over its working life. The round form measures 380mm across and weighs 602g, keeping the fixing simple on plasterboard or masonry. Other wattages in the ENELO range cover larger and smaller coverage needs.

Can the ENELO be used outdoors?

Yes, in sheltered positions. Its IP44 rating means it resists splashing and damp, so it is suited to porches, carports and covered walkways. Keep it out of fully exposed locations and away from direct water jets.

Does it come with a bulb?

No separate bulb is needed. The ENELO uses an integrated LED rated for around 20,000 hours, so there is nothing to fit or replace. It produces 2200 lumens at 4000K neutral white straight from the fitting.

Where is this bulkhead typically used?

It is a common choice for entrance halls, stairwells, utility rooms and bathroom zones away from direct spray, plus covered outdoor spots. It mounts to either a wall or a ceiling, so it adapts to doorways, landings and passages.

How do I clean it?

Wipe the white diffuser and metal body with a soft, slightly damp cloth and dry it off. Avoid abrasive cleaners or solvents, which can mark the finish. Always switch the fitting off and let it cool first.