Description
The Elvaris Medium is a 450mm vertical wall light built around a slim blade of natural Spanish alabaster set between two parallel brushed brass fins. An integrated 6W LED inside the body lights the alabaster from within, casting warm 3000K light through the stone so the panel itself glows rather than directing light outward as a spot.
At 450mm tall, 130mm wide and projecting just 60mm from the wall, Elvaris suits hallways, stairwells, bedside walls, and the flanks of mirrors or fireplaces where a slim vertical accent reads better than a round or boxy fitting. The shallow projection keeps the light close to the wall in narrow corridors, and the symmetrical form pairs naturally for matched installations either side of a doorway, headboard or vanity.
The frame is solid copper finished in brushed brass, giving the fitting weight and a softer, lower-sheen finish than plated brass. The alabaster blade is cut from a single piece of stone, so each Elvaris shows different mineral veining and tonal variation when lit. Hardwired into a 230V supply with the LED driver concealed in the body, the fitting is designed for permanent installation onto a standard back box.
Specification
| Material |
Solid Copper & Natural Spanish Alabaster |
| Finish |
Brushed Brass & Soft White |
| Height |
450mm |
| Width |
130mm |
| Projection |
60mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Wattage |
6W |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Downloads
Instruction Manual
Frequently Asked
Does it come with a bulb?
The LED is integrated into the fitting, so no separate bulb is required or replaceable. Output is fixed at 6W on 230V mains with a warm 3000K colour temperature.
Is the Elvaris dimmable?
Dimmability depends on the integrated driver and the specific dimmer model used. Please contact us before pairing this fitting with a dimmer so we can confirm compatibility for your installation.
Can it be installed in a bathroom?
This fitting does not carry a stated IP rating and is not intended for installation in bathroom zones or other damp locations. It is designed for dry indoor use such as hallways, bedrooms, living rooms and stairwells.
Will the alabaster look identical to the photo?
Each blade is cut from natural Spanish alabaster, so veining, translucency and tonal variation differ between individual pieces. The photographed example shows one cut of stone — your fitting will share the same form and proportions but will have its own pattern when lit.