Description
The Ecliptus is a 5-metre 24V LED strip light rated IP65 for outdoor and wet-location installation, delivering 102W of 3000K warm white light across densely-packed surface-mount LEDs on a flexible white PCB. The strip runs on 24V DC power, requiring a compatible LED driver (sold separately), and supports dimming when paired with a 24V-compatible dimmer or driver with PWM dimming output.
Designed for cove lighting, under-cabinet installation, outdoor architectural accent, and wet-location task lighting, the strip suits fascia lighting on buildings, deck and patio perimeter lighting, bathroom mirror backlighting, and kitchen worktop under-lighting. The IP65 silicone coating protects the LEDs and circuitry from dust ingress and water jets from any direction, making the strip suitable for uncovered outdoor installation in the UK climate. The 10mm width allows the strip to fit into narrow aluminium channels and tight installation gaps.
The strip arrives as a single 5-metre continuous run and can be cut to shorter lengths at marked intervals (typically every 50-100mm depending on LED density) to fit the installation space. The cut points expose copper pads for soldering power connections or attaching clip-on connectors. The 24V operating voltage reduces voltage drop over long runs compared to 12V strips, meaning brightness remains more consistent across the full 5-metre length without needing mid-run power injection. The 3000K colour temperature provides warm white light comparable to traditional halogen, avoiding the cooler blue-white tone of higher Kelvin ratings.
Ideal Lux backs the Ecliptus with a 5-year warranty covering LED degradation and driver failure when installed according to the manufacturer's guidelines. The strip requires a 24V constant-voltage LED driver rated for at least 102W load — confirm driver compatibility before installation.
Specification
| Length (mm) |
5000 |
| Projection (mm) |
10 |
| Dimmable |
Yes |
| Bulb Type |
Strip |
| Colour Temperature |
3000K |
| IP Rating |
IP65 |
| Warranty |
5 Years |
Frequently Asked
What power supply does the Ecliptus need?
The strip requires a 24V DC constant-voltage LED driver rated for at least 102W. The driver is sold separately. Confirm the driver has adequate wattage headroom (typically 10-20% above the strip's rated load) for safe long-term operation.
Can the strip be cut to shorter lengths?
Yes. The strip has marked cut points at regular intervals (typically every 50-100mm) where it can be cut with scissors. Cutting exposes copper pads for soldering new power connections or attaching clip-on connectors.
Is it suitable for outdoor installation?
Yes. The IP65 silicone coating protects against dust and water jets, making the strip suitable for uncovered outdoor use including fascia lighting, deck perimeters, and patio accent lighting in the UK climate.
How is dimming controlled?
Dimming requires a 24V-compatible dimmer or a dimmable LED driver with PWM output. The strip itself does not include dimming circuitry — dimming control happens at the driver level. Confirm driver compatibility before purchasing a dimmer.