E27 Specialty 26W LED Filament Bulb IP65 - Cool White

This E27 LED filament bulb takes the familiar Edison Screw (ES) cap and pushes a high light output through a set of visible LED filaments behind clear glass, giving the vintage filament look with serious brightness behind it. It draws 26 W of actual power yet produces 4000 lumens, standing in for an old 227 W bulb without the running cost of one. The tone is a crisp 4000K cool white, and the wide 320 degree beam angle spreads light almost all the way around the bulb rather than firing it in one direction. In US terms this is a high-output filament-style screw bulb, sitting well above the brightness most household lamps reach.

Because it throws light over a near-spherical 320 degree spread, it works where one bulb needs to fill a space rather than spotlight a surface. The 4000 lumen output and cool white tone suit workshops, garages, outbuildings, porches and covered yards, and the IP65 rating means it copes with exposed outdoor and wet positions that would shorten an ordinary bulb. It also fits open-shade pendants, festoon holders and exterior lanterns that take an E27 cap. With efficiency rated at 154 lm/W, it gives that broad, even coverage while keeping the load low.

The bulb measures 90 mm in diameter and 245 mm in length and weighs 186 g, running on 220 to 240 V AC through its E27 base. Colour rendering is rated at Ra 80, the cool white is fixed at 4000K, and rated life is 25,000 hours. It is a non-dimmable bulb, so pair it with a standard switched circuit rather than a dimmer. The IP65 sealed construction is what lets it sit outdoors or in damp areas, and the clear glass keeps the filament detail on show.

Product Specification Sheet

Range Datasheet

What fitting does this bulb need?

It uses an E27 Edison Screw (ES) cap, the larger of the two common screw fittings. Any holder or fitting marked E27 or ES will take it. Check the diameter and 245 mm length against enclosed shades, as it is a longer bulb than a standard household lamp.

What old bulb wattage does it replace?

It draws just 26 W of actual power but delivers 4000 lumens, which stands in for an old 227 W bulb. You get the brightness of the high-wattage original at a fraction of the energy use.

Can it be used outdoors or in damp places?

Yes. The IP65 rating means it is weatherproof and suitable for exposed outdoor and wet locations, so it can go in porches, covered yards and exterior lanterns. It is rated against water jets and dust as well as splashes.

Is this bulb dimmable?

No, it is non-dimmable, so run it on a standard switched circuit rather than a dimmer. Using it on a dimmer can cause flicker or shorten the rated 25,000 hour life. The 4000K cool white output is fixed.