Description
This E27 reflector LED bulb gives directional light from a familiar R63 shape, screwing into a standard Edison Screw (ES) holder. In the US this is the BR-style reflector or spot bulb on a medium screw base. It draws just 8 W while producing 720 lumens at 3000K warm white, with a 120 degree beam that spreads its output across a wider field than a tight spot. The colour rendering is Ra 80, so colours read naturally under the light.
Because it throws light in one direction, this bulb suits recessed and semi-recessed fittings, spotlight bars, downlight cans and adjustable reading or display lamps where the beam needs aiming at a surface rather than filling a whole room. The 120 degree spread covers a generous pool below the fitting, making it a practical choice for kitchen work zones, shelving and accent points indoors. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any damp or exposed location.
The bulb pairs an 8 W LED with the standard E27 cap and a Ø63 by 104 mm body, weighing 58 g, so it fits the same sockets as a traditional R63 reflector lamp. As a direct replacement for an old 54 W bulb it cuts running cost while keeping comparable brightness, and a 15,000 hour rated life means fewer changes. It runs on 220 to 240 V AC mains with no separate driver needed. This bulb is non-dimmable, so pair it with a plain on/off switch rather than a dimmer circuit. Other reflector and shaped LED bulbs are available across our E27 range.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
Reflector |
| Power |
8 W |
| Replaces |
54 W incandescent |
| Luminous flux |
720 lm |
| Efficiency |
90 lm/W |
| Colour temperature |
3000K (Warm White) |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| Dimmable |
No |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has an E27 Edison Screw (ES) cap, so it screws into any standard large screw-fit holder. The R63 reflector body measures Ø63 by 104 mm, matching a traditional R63 reflector lamp.
What old bulb wattage does it replace?
The LED draws only 8 W itself but replaces an old 54 W bulb, producing 720 lumens. You get similar brightness for a fraction of the running cost.
Is this bulb dimmable?
No, it is non-dimmable. Use it on a standard on/off switch rather than a dimmer, as fitting it to a dimmer circuit can cause flicker or buzz.
What is the beam angle and colour?
It has a 120 degree beam, wider than a typical spot, casting a broad pool of light. The tone is 3000K warm white with Ra 80 colour rendering for natural-looking colours.