Description
This E27 golf ball LED bulb takes the small, round G45 shape and pairs it with visible LED filaments behind clear glass for a vintage, exposed-element look. It draws just 7 W while putting out 1055 lumens at 2700K, a warm white tone that suits decorative and ambient fittings. The cap is an E27 Edison Screw, the standard large screw fitting, and the wide 320 degree beam pushes light out almost all the way around the bulb rather than in one direction. For anyone shopping by US terms, this is the screw-base equivalent of a household light bulb in the small round G45 size.
The warm 2700K output and gentle, near all-round spread make this bulb a good fit for pendants, wall fittings, lanterns and bare-shade fixtures where the bulb itself is on show. Because the filaments are visible through the clear glass, it reads best in fittings that leave the lamp exposed, such as cluster pendants over a dining table, a hallway lantern or a bedside fitting. With 1055 lumens it gives a useful working brightness for a single decorative fitting, while the 2700K tone keeps the light soft and relaxed rather than bright and clinical. Being IP20 rated, it is for dry indoor use only and should be kept out of bathrooms, porches and any exposed outdoor position.
The bulb measures Ø45 by 78 mm and weighs just 18 g, with a transparent glass envelope over the filament array and an E27 screw base. Colour rendering is Ra 80, the light source is a G45 golf ball format, and rated life is 15,000 hours running on 220 to 240 V AC at an efficiency of 151 lm/W. This bulb is non-dimmable, so pair it with a standard on/off switch rather than a dimmer circuit. We stock matching filament lamps in other cap fittings and shapes across the range if you need the same warm look elsewhere.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
Golf Ball (filament) |
| Power |
7 W |
| Replaces |
75 W incandescent |
| Luminous flux |
1055 lm |
| Efficiency |
151 lm/W |
| Colour temperature |
2700K (Warm White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
No |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has an E27 cap, the large Edison Screw (ES) fitting found on many pendants, lanterns and wall lights. You simply screw it into an E27 holder. Check your existing bulb or fitting reads E27 before ordering.
What old bulb wattage does it replace?
It draws only 7 W but produces 1055 lumens, which is bright enough to replace a 75 W traditional bulb. The 7 W figure is the actual power it uses, so it cuts running costs against the old incandescent it stands in for.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It should be used on a standard on/off switch and is not suitable for a dimmer circuit, as fitting it to a dimmer can cause flicker or shorten its life.
What does the warm white colour look like?
It runs at 2700K, a warm white that is soft and slightly golden rather than bright and blue. With the visible filaments behind clear glass it gives a relaxed, traditional glow that suits living rooms, dining areas and bedrooms.