Description
This is a classic A60 LED bulb in the familiar rounded household shape, fitting any E27 Edison Screw (ES) holder. It draws just 4.9W while giving out 500 lumens, which is the kind of output you would once have needed a 41W old-style bulb to match. The 3000K warm white tone keeps the light soft and easy on the eye, and the wide 180° beam angle spreads light broadly rather than throwing it in one direction, so it fills a shade or open fitting evenly. In US terms an A60 is the equivalent of an A19 household lamp on a standard screw base.
Its broad spread and warm tone make it a good general-purpose bulb for everyday rooms, working well in pendants, table lamps, floor lamps and ceiling fittings around the home. The 180° angle suits open shades and bare-holder fittings where you want light reaching out across a space rather than a tight pool, while the 500 lumen output sits comfortably in lamps and accent fittings rather than as a sole source for a large room. As an IP20-rated bulb it is for dry indoor use, so keep it clear of bathrooms, porches and any damp or outdoor location.
The bulb has the standard opal-style A60 body in a white finish, measuring Ø60 by 107 mm and weighing only 30 g, so it drops into existing fittings without fuss. It runs on 220-240V AC mains direct from the E27 cap, with no separate driver to add. Colour rendering is rated Ra 80 for natural-looking colours, efficiency is 102 lm/W, and the rated lifespan is 15,000 hours. Please note this bulb is non-dimmable, so it is best paired with a standard on/off switch. We stock matching E27 LED bulbs in other outputs across the range.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
GLS |
| Power |
4.9 W |
| Replaces |
41 W incandescent |
| Luminous flux |
500 lm |
| Efficiency |
102 lm/W |
| Colour temperature |
3000K (Warm White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
No |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb use?
It has an E27 Edison Screw (ES) cap, the larger screw fitting found on many pendants, table lamps and ceiling fittings. The A60 body is the standard rounded household shape, measuring Ø60 by 107 mm, so it fits the same holders as a traditional bulb.
What old-style bulb does this 4.9W LED replace?
The LED itself draws only 4.9W, but it gives 500 lumens, which matches the output of a 41W old-style bulb. You get the same brightness for a fraction of the energy use.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It should be used with a standard on/off switch rather than a dimmer, as fitting it to a dimmer circuit can cause flicker or buzzing.
What does the warm white colour look like?
It is a 3000K warm white, giving a soft, cosy tone that suits living rooms, bedrooms and relaxed spaces. With a CRI of Ra 80 colours look natural under the light, and the 180° beam spreads it broadly across the room.