E27 GLS 7W Filament ST64 60W-eq 320° 806lm LED Bulb - Cool White

This E27 LED bulb draws just 7W while putting out 806 lumens, replacing a traditional 60W bulb at a fraction of the running cost. It uses the E27 Edison Screw (ES) cap and an ST64 light source, the slightly elongated teardrop shape carrying visible LED filaments behind clear transparent glass for a vintage look. American buyers will recognise the screw-in fit as the standard medium-base lamp, here in the larger E27 size. The 4000K cool white tone gives a clean, neutral light, and the wide 320° beam angle spreads it almost all the way round the bulb rather than throwing it in one direction.

Because the filaments are exposed through clear glass, this lamp is at its best where the bulb itself is on show, so it suits open pendants, bare-flex fittings, wall brackets and table or floor lamps in living rooms, hallways and dining areas. The near-omnidirectional 320° spread means it lights a room evenly rather than spotlighting a surface, which makes it a good general-purpose choice in shades and clear glass fittings alike. At 806 lumens it gives a useful working brightness for an everyday room without the heat of an old incandescent. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor position.

The bulb measures Ø64 by 140 mm and weighs 44g, with a transparent glass envelope showing the filament array and an efficiency of 115 lm/W. It is rated for 15,000 hours and runs on 220 to 240V AC mains through the E27 cap, so no transformer or driver is needed. The colour rendering is Ra 80 for honest, natural-looking colour at home. Please note this bulb is non-dimmable, so pair it with a standard on/off switch rather than a dimmer circuit. Other caps and shapes are available across the wider filament bulb range.

Product Specification Sheet

Range Datasheet

Which fitting does this bulb need?

It has an E27 Edison Screw cap, also called ES, which is the larger screw-in fitting common on pendants, table lamps and many ceiling fittings. It is the standard medium screw base familiar to US buyers, in the E27 size. Simply screw it into any matching E27 holder.

What old bulb wattage does it replace?

It draws only 7W but gives 806 lumens, which is equivalent to a traditional 60W incandescent bulb. The LED itself never uses more than 7W, so it cuts running costs sharply while keeping the same everyday brightness.

Is this bulb dimmable?

No, this is a non-dimmable bulb, so it should be used on a standard on/off switch. Fitting it to a dimmer circuit may cause flicker or buzz and could shorten its life, so a plain switch is the right choice here.

What does the filament and ST64 shape look like?

It is a filament-style LED with visible glowing filaments behind clear transparent glass for a vintage, decorative appearance. The ST64 envelope is a gently elongated teardrop shape measuring Ø64 by 140 mm, which looks at home in open and bare-flex fittings where the bulb is on display.