Description
This E27 GLS LED bulb takes the classic A60 household shape, the rounded form most people picture when they think of a standard light bulb. It fits the E27 Edison Screw cap (the larger screw fitting), which US buyers know as the medium screw base, and it draws just 7W while putting out 810 lumens. The visible LED filaments sit inside clear glass, giving the warm, vintage glow of an old incandescent without the energy cost. The 2700K warm white tone is soft and amber, and the wide 320° beam spreads light almost all the way around the bulb rather than throwing it in one direction.
Because the filaments are on show through transparent glass, this bulb suits fittings where the lamp is visible: open pendants, exposed-cable fixtures, wall brackets and table or floor lamps in living rooms, dining areas, bedrooms and hallways. The all-round 320° spread makes it a good match for a shade or a bare-bulb pendant where light needs to reach the whole room rather than a single spot. At 7W it replaces a 60W old-style bulb, so it is a straight swap into existing E27 fittings with no change in brightness. It is rated IP20 for dry indoor use only, so keep it indoors and clear of bathrooms, porches and any damp or outdoor spot.
The bulb measures Ø60 x 104 mm and weighs 34 g, with a transparent glass envelope and an E27 cap running on 220 to 240V AC. It is dimmable, so it works on a compatible LED dimmer to set the level you want from a soft evening glow to full output. The CRI Ra 80 rendering keeps colours looking natural, and the rated lifespan is 15,000 hours. With an efficiency of up to 116 lm/W, it makes good use of every watt. This E27 filament bulb is part of our wider range of screw-cap LED lamps in matching warm white tones.
Specification
| Cap / fitting |
E27 Edison Screw (ES) |
| Bulb shape |
GLS (filament) |
| Power |
7 W |
| Replaces |
60 W incandescent |
| Luminous flux |
810 lm |
| Efficiency |
116 lm/W |
| Colour temperature |
2700K (Warm White) |
| Colour rendering (CRI) |
Ra 80 |
| Dimmable |
Yes |
| Rated life |
15000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It uses the E27 Edison Screw cap, the larger of the two screw fittings (US buyers know it as the medium screw base). It is a direct replacement for any E27 holder, so it screws straight into existing lamps and pendants.
What old bulb wattage does it replace?
The LED itself draws only 7W but gives 810 lumens, which matches the brightness of a 60W traditional incandescent bulb. You get the same light for a fraction of the energy use.
Is this bulb dimmable?
Yes, it is dimmable when used with a compatible LED dimmer switch. This lets you set the level from a low warm glow up to full output to suit the room and time of day.
What does the warm white tone and filament look like?
It runs at 2700K warm white, a soft amber light that suits relaxed living and dining spaces. The clear glass shows the visible LED filaments inside for a vintage look, so it works well in fittings where the bulb is on display.