E27 GLS 7.2W 40W-eq Filament LED Bulb 470lm 320° - Cool White

This E27 GLS LED bulb is a classic rounded A60 household lamp built around visible LED filaments inside clear glass, giving it the vintage look of an old incandescent while running on modern LED. It draws 7.2 watts and puts out 470 lumens at 4000K, a cool white tone that reads crisp and neutral rather than yellow. The fitting is an E27 Edison Screw (ES), the standard large screw cap; in the US this is the everyday A19-style screw bulb. With a wide 320 degree beam the light spreads almost all the way round, so it suits open shades and exposed pendants where the filaments are meant to be seen.

As a 40W-equivalent bulb this is a low-output lamp, so think of it as accent and ambient light rather than a main task source. It works well in pendants over a hallway or dining nook, in table and floor lamps, and in decorative open fittings where the filament detail adds to the look. The cool white tone keeps colours looking natural, which makes it a sensible choice in kitchens, studies and entrance areas where a slightly brighter, cleaner light is wanted. Because the glow is gentle, group several fittings or pair it with other lighting where you need stronger illumination across a room. It is rated IP20 for dry indoor use only and should be kept away from bathrooms, porches and any damp or outdoor spot.

The bulb has a clear transparent glass envelope over straight LED filament strands, measuring 60 mm across and 108 mm long and weighing just 30 g. It runs on 220 to 240V AC mains direct from the E27 holder with no separate driver, has a colour rendering of Ra 80 and an efficiency of 104 lm/W. This is a non-dimmable bulb, so fit it to a standard non-dimmed circuit. Rated for 15,000 hours, it is a long-life replacement for a 40W filament lamp.

Range Datasheet

Which fitting does this bulb need?

It uses an E27 Edison Screw cap, the standard large screw fitting (ES). It twists straight into any E27 holder, which in the US is the common A19-style screw socket. No adapter is needed for a standard E27 fitting.

What old bulb wattage does it replace?

It is a 40W equivalent, so it gives roughly the light of an old 40W incandescent bulb while drawing only 7.2 watts. The actual output is 470 lumens at 4000K cool white. That makes it an accent and ambient lamp rather than a high-brightness task light.

Is this bulb dimmable?

No, this is a non-dimmable bulb. Fit it to a standard non-dimmed circuit and avoid pairing it with a dimmer switch, as that can cause flicker or shorten its life. Choose a dimmable lamp if you need adjustable brightness.

How long does it last and how much does it save?

It is rated for 15,000 hours of use and runs at an efficiency of 104 lm/W. Drawing 7.2 watts in place of a 40W incandescent, it uses far less energy for a comparable amount of light, so running costs and replacement frequency are both lower.