E27 GLS 10.5W Dimmable LED Bulb 75W-eq 1060lm 220° - Cool White

This E27 GLS LED bulb takes the classic rounded A60 household shape, so it drops straight into pendants, table lamps and standard fittings without looking out of place. It draws just 10.5W yet gives a bright 1060 lumens, which makes it a direct stand-in for an old 75W incandescent at a fraction of the running cost. The Edison Screw (ES) cap is the familiar large screw fit, and US buyers will know this base as the standard screw-in light bulb. A wide 220 degree beam angle and a 4000K cool white tone spread an even, crisp light rather than a tight spot, suiting it to general use around the home.

Cool white at 4000K sits between warm and daylight, giving a clean, neutral light that reads well for kitchens, home offices, utility rooms, hallways and living spaces where you want clarity rather than a cosy yellow glow. Because the beam opens to 220 degrees the output washes outward in most directions, so a single bulb lights a small room well and several together cover larger open-plan areas. The CRI of Ra 80 keeps colours looking natural under the light. With an IP20 rating this is a dry indoor bulb, so keep it to enclosed interior fittings and clear of bathrooms, porches or any damp or outdoor position.

Built on a standard E27 cap with an A60 polycarbonate-style body in a white finish, the bulb measures 60mm across and 110mm long and weighs just 42g, so it balances neatly even in lighter fittings. It runs on 220 to 240V AC mains, returns 101 lm/W in efficiency and is rated for 25,000 hours of use. This bulb is fully dimmable, letting you set the level from a soft background glow to full brightness on a compatible dimmer. Niori stocks this E27 range across several wattages and colour temperatures if you want to match it across a room.

Product Specification Sheet

Range Datasheet

What fitting do I need for this bulb?

It uses an E27 cap, also called Edison Screw or ES, which is the large screw-in fitting common on pendants, table lamps and many standard light fittings. In the US this is the standard screw-in base. Simply screw it in to replace an existing E27 bulb.

What old bulb wattage does it replace?

Drawing only 10.5W, it delivers 1060 lumens, which is equivalent to a traditional 75W incandescent bulb. You get the same level of brightness while using a fraction of the energy. The bulb itself only ever draws 10.5W.

Is this bulb dimmable?

Yes, this bulb is fully dimmable and works with a compatible LED dimmer switch. You can take it from a low, soft level up to its full 1060 lumen output. For best results pair it with a dimmer rated for LED loads.

What does the 4000K cool white tone look like?

At 4000K the light is a clean, neutral cool white, sitting between a warm yellow and a bright daylight tone. It gives a crisp, clear light that suits kitchens, home offices and utility areas. With a CRI of Ra 80 colours stay natural under it.