Description
This is a golf ball LED with an E27 screw cap, the larger of the two screw fittings used on lamps and pendants in the UK. It draws 4.2W and gives 470 lumens at 6500K, a daylight white that reads crisp and slightly blue next to the yellower light of an older filament bulb. The pack rates it as a 40W replacement. The frosted envelope sits over the diode so the bulb reads as a plain white ball rather than a cluster of bright points, which matters in an open shade or a clear glass fitting where the lamp itself is on show.
A golf ball is the shape to reach for when the fitting is small and a standard GLS bulb would sit proud of the shade. It suits bedside lamps, small table lamps, wall lights and multi-arm pendants where several bulbs sit close together and bulk is the deciding factor. The 6500K colour temperature pushes it towards places where you want to see clearly rather than wind down: a kitchen, a utility room, a home office, a hobby bench or a workshop lamp. In a bedroom it will feel bright and awake, so if you want a softer glow after dark, pick a 2700K bulb instead.
Dimming needs a dimmer switch built for LED loads. Older mains dimmers made for filament bulbs often have a minimum wattage well above 4.2W, and a single lamp of this size may flicker or refuse to strike on one. The pack prints a 25,000 hour life and an instant start, so there is no warm-up before full brightness. The energy label carries class E, and the IP20 rating means dry indoor fittings only. One unit is one bulb, with a minimum order of 10 in multiples of 10. We stock the same 4.2W and 470lm lamp as a B15 candle in warm white 2700K.
Specification
| Fitting |
E27 (ES) screw |
| Shape |
Golf ball, frosted |
| Technology |
LED |
| Wattage |
4.2W |
| Brightness |
470lm |
| Equivalent |
40W, as printed on the pack |
| Colour temperature |
6500K, daylight |
| Beam angle |
240 degrees |
| Dimmable |
Yes |
| IP rating |
IP20 |
| Energy rating |
E |
| Lifespan as printed |
25,000 hours, as printed on the pack |
| Sold as |
Single bulb |
| Minimum order |
10, sold in multiples of 10 |
Frequently Asked
How do I know my lamp takes an E27 cap?
E27 is the larger screw cap, roughly 27mm across the thread. Unscrew the old bulb and compare it: the smaller screw cap, E14, is noticeably narrower and will not thread into an E27 holder.
How bright is 470 lumens in real terms?
The pack rates it as a 40W replacement, so it lands where a small filament bulb used to sit. That is enough for a bedside lamp, a wall light or one lamp in a multi-arm pendant.
What does 6500K daylight actually look like?
It is a cool, white light with a slight blue cast, close to overcast daylight. It keeps whites looking white and suits tasks such as cooking, reading fine print, sewing or working at a bench.
Will it dim on my existing dimmer switch?
It is dimmable, but it needs a dimmer rated for LED loads. A dimmer designed for filament bulbs usually has a minimum wattage far above 4.2W, and one bulb alone may flicker or fail to start.
Is it 4.2W or 5W?
The retail pack prints 5W while the rated figure is 4.2W. Both refer to the same lamp at 470 lumens, and the energy label records 5kWh per 1000 hours of use at class E.
Does the 240 degree beam angle matter?
It means light leaves the bulb almost all the way round rather than in a forward cone, so an open shade or a glass globe fills evenly instead of showing a bright patch.