Description
Cut as a shallow curve rather than a steep taper, this metal shade sits low and wide, spreading light downwards across a mouth of 21cm. Satin black gives it a flat, quiet surface that keeps the eye on the light rather than the shade itself, and the curved profile eases the edge of the pool below. It is non-electric, so lamp and power both come from the fitting it sits on.
We would put it on the curved over arm floor lamp from the same range, where the arm reaches out over a chair and the shade hangs just above head height for reading. That low, broad shape works best where you want light on a book, a table or a worktop rather than a wash across the whole room, so it suits a reading corner, a seat beside the sofa or a spot at the end of a kitchen island. A GLS or tubular LED does the job neatly beneath it, chosen to suit the host fitting.
The shade is pressed from metal and painted, light enough to handle easily and firm enough to keep its shape in use. Dust settles on the inner face as much as the outer, so an occasional wipe with a dry duster on both surfaces is all it asks; keep polishes and solvents away from the paint. It carries a one year warranty. We stock the same shallow cone in painted antique brass, antique copper, painted bronze, pewter, beige stone and satin nickel with silver, and in a wider 30cm size if you want a broader spread of light from the same shape. Mixing two sizes across a pair of floor lamps in one room reads well. No lamp is supplied with the shade.
Specification
| Colour |
Satin Black |
| Weight |
0.22KG |
| Diameter |
210mm |
| Height |
70mm |
| Materials Used |
Iron |
| Energy Class |
Not Applicable |
| Lamp Cap |
Non-Electric |
| Recommended Lamp |
LED (GLS A60, Tubular T45) |
| IP Rating |
IP20 |
| Shade Socket |
E27 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Satin Black |
| Shade Hole Diameter |
42mm |
| Pieces Included |
1 |
| Installation |
Requires attaching to a relevant light source |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
How big is the fixing hole at the top?
The hole measures 42mm in diameter, which is the standard opening used by the curved over arm floor lamps in this range.
What are the shade's dimensions?
It is 210mm in diameter and 70mm high, giving a broad but shallow cone.
Does the shade include a lamp or any wiring?
No. It is a non-electric shade, so the lampholder, flex and lamp all belong to the fitting it goes on.
Which lamps work best under it?
LED in GLS A60 or tubular T45 form suits it well, subject to the maximum wattage of the host fitting.
How should I clean the satin black finish?
Wipe both the inside and outside with a soft dry cloth. Avoid metal polish, abrasive pads and solvent cleaners, which will mark the paint.
Is there a larger version of the same shape?
Yes, the same shallow cone is made in a 300mm diameter, including satin black.