Description
The Dasten is a ground-standing bollard light that runs on a max 11W G9 lamp at 220-240V AC, giving a low, close-to-ground spread of light along paths, drives and borders. It is a free-standing post fixed to the ground rather than a wall fitting, so it marks an edge or zone from underfoot rather than throwing light across a wide area. With a compact 70 by 97 by 160 mm body, it sits low and keeps the beam where it is needed.
Outdoor, this bollard suits a front path, a driveway edge, the line of a border or a garden zone that needs gentle definition after dark. Its IP44 rating makes it splash-resistant and well suited to covered or sheltered positions such as a porch surround or a spot under planting, though it should be kept clear of fully-exposed, jetted or standing water. Rather than lighting a whole space, it gives a pool of light at ground level, so spacing several along a run gives an even, repeated marker effect down a path or drive.
The body is aluminium alloy in an anthracite finish, weighing 470 g, which gives it enough mass to stand steadily once base-fixed to the ground. The G9 cap takes a replaceable lamp, so the light source can be swapped over time, and the LED source keeps running costs low. Mounting is to the ground via its base rather than to a wall, in keeping with its bollard form. The Dasten Bollard Lights range shares this base name across several variants, so matching units can be run along a single path for a consistent look.
Specification
| Power |
max 11W |
| Voltage |
220-240 AC |
| IP rating |
IP44 |
| Cap / base |
G9 |
| Light source |
LED |
| Dimensions |
70 × 97 × 160 mm |
| Weight |
470 g |
| Material |
Aluminium Alloy |
| Finish |
Anthracite |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can the Dasten be used outdoors?
Yes, it is rated IP44, which makes it splash-resistant and suited to covered or sheltered outdoor positions such as a porch surround, a planted border or a path edge. It should be kept clear of fully-exposed spots, direct water jets or standing water. For an open path it is best placed where overhanging planting or a structure offers some cover.
How is it fixed in place?
It is a free-standing bollard fixed to the ground through its base, not a wall fitting. This lets it stand upright along a path, drive or border. Once secured, its 470 g aluminium alloy body keeps it stable.
Does it take a replaceable bulb?
Yes, it uses a G9 cap that takes a replaceable LED lamp of up to 11W, running on 220-240V AC. This means the light source can be changed rather than replacing the whole fitting. Choose a warm tone for soft, low-level garden light.
How should I space these along a path?
Because each bollard gives a low pool of light at ground level rather than lighting a whole area, running several at even intervals creates a consistent line of markers. Spacing them so the pools just meet keeps a path or drive clearly defined without dark gaps. The matching units in the Dasten range make this easy to repeat.