Description
This corner connector turns a run of corner LED profile through a right angle, so the line of light carries on around the corner rather than stopping short. It is an L-shaped piece with an aluminium body and an opal white diffuser across its curved face. It measures 11cm long, 1.6cm wide and 1.6cm high, small enough to tuck neatly into the angle without drawing the eye. This is the left connector, so check which way your corner turns before you order.
We see it at its best where a ceiling meets a wall or the face of a bulkhead, sitting in the inside angle and carrying the light around the edge of the room. Ceiling edges and bulkheads look far tidier with an unbroken line than with separate lengths that stop short and leave a dark gap at the turn. It suits anyone running corner LED profile indoors, in a dry room, who wants the finished run to look planned rather than pieced together.
Aluminium is light and does not rust, and here the body is a triangular channel with the opal diffuser set across its open side. Small metal tabs sit near each open end, and the aluminium finish blends quietly with a white or pale ceiling. It weighs just 0.044KG packed. Before you order, measure each straight run and mark every corner and the way it turns, so you know exactly which connectors the job needs.
Specification
| Length |
11cm |
| Width |
1.6cm |
| Height |
1.6cm |
| Body Material |
Aluminium |
| Body Colour |
Aluminium |
| Weight (packed) |
0.044KG |
Frequently Asked
Which way does this connector turn?
This is the left connector, so check which way your corner turns before you order, because it carries the profile through a right angle.
How big is the connector?
It measures 11cm long, 1.6cm wide and 1.6cm high, and weighs 0.044KG packed, so it tucks neatly into an inside angle.
What material is the connector?
The body is aluminium, which is light and does not rust, with an opal white diffuser across its curved face.
Where does it work best?
It works best where a ceiling meets a wall or a bulkhead, carrying a run of corner LED profile around the turn without a dark gap.
Can it go in a bathroom or outdoors?
We suggest keeping it indoors in a dry room, where it sits neatly along a ceiling edge or around the corner of a bulkhead.