Description
Light leaves this one in two directions, up the wall and down it, through frosted diffusers set into a slim rectangular body finished in sand white. The LED is integrated and tuned to a warm 3000K, so the light it throws is soft and yellow-leaning rather than clinical, gathering to 452 lumens across both ends. It is not dimmable, and there is no switch on the body, so it takes its cue from whatever controls the circuit.
We reach for shapes like this either side of a front door, where a lantern would sit too proud and the projection needs to stay shallow enough to pass a wheelie bin or a pushchair. It suits porches, side returns, a garden wall beside a gate, and the length of a patio where you want the brick or render lit rather than the paving. Rated for outdoor use, it takes rain and blown dust in its stride on an exposed elevation as readily as under the eaves. Fitted in sequence along a boundary, these give a rhythm of light with nothing glaring at eye level.
The sand white finish sits quietly against pale render or painted brick rather than reading as an object stuck on it, and the frosted diffusers soften the edge of each beam where it meets the surface. Grime, not dust, is what dulls white paint outdoors, so switch off at the circuit and give it a wipe with a damp cloth and a little mild soap once a season, keeping abrasives well away from the diffusers. It carries a three year warranty. We also stock the same fitting in anthracite, and a smaller version in both finishes for a narrow wall or a tight door surround.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.55KG |
| Length |
175mm |
| Height |
90mm |
| Projection |
30mm |
| Materials Used |
Aluminium Die-Casting Body, Frosted Glass Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
2 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| System Flux |
452lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
13.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How big is it on the wall?
It measures 175mm long by 90mm high, and stands just 30mm off the wall, so it stays clear of doorways and paths.
Are the bulbs replaceable?
No. The LED is integrated at 2 x 6W, so there is nothing to change and no lamp to buy.
Can I put it on a dimmer?
It is not dimmable. Wire it to a standard switch, or to a sensor or timer circuit if you want it to come on by itself.
How warm is the light?
3000K warm white, giving a total of 452 lumens split between the upward and downward beams.
Is it suitable for an exposed wall?
Yes, it is IP54 rated for outdoor use, so rain and windblown dust are not a problem.
Is there a smaller one?
Yes. The small Contour wall light runs at 2 x 3W with 350lm, and comes in sand white or anthracite.