Description
A slim anthracite block that throws light both up and down the wall, this is the smaller of the two sizes in the Contour range. Frosted lenses at the top and bottom soften the output, so you get a gentle wash over the surface rather than a hard-edged beam. The LED is built in and gives a warm white 3000K light of around 350 lumens in total, enough to mark a doorway or pick out brickwork without glare in anyone's eyes.
We reach for this one where space is tight: the body stands barely 30mm off the wall, so it suits a narrow porch, a side passage, the run beside a set of steps or a boundary wall you walk past rather than sit under. It is sealed against rain and splashing for ordinary garden and frontage positions. Flanking a door is how we would use it most, keeping the light low, even and repeated. There is no switch on the fitting itself, so it takes its cue from the circuit it serves, whether that is a switch indoors or a sensor, and it is not a dimming fitting.
The housing wears a matt anthracite finish, a dark grey that settles quietly against render, brick and stone, with the frosted lenses as the only lighter note. Looking after it outdoors means little more than a wipe with a damp cloth every so often to clear cobwebs and road grime off the lenses, plus a glance over the finish at the end of winter. It carries a three year warranty. We also stock this same small fitting in sand white, and a larger version in both anthracite and sand white for broader walls or a taller frontage where you want a longer throw of light. Because the LED is integrated, there is nothing to buy separately and nothing to change.
Specification
| Colour |
Anthracite |
| Ceiling Mountable |
Yes |
| Weight |
0.39KG |
| Length |
115mm |
| Height |
90mm |
| Projection |
30mm |
| Materials Used |
Aluminium Die-Casting Body, Frosted Glass Diffuser |
| Energy Class |
G |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
2 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| System Flux |
350lm (±5%) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Frosted |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
Around 350 lumens in total from the two integrated LEDs, split between the upward and downward lenses. The colour is 3000K warm white, a soft yellow-white that flatters brick, render and timber.
How far does it stick out from the wall?
Only 30mm. The fitting measures 115mm across and 90mm tall, so it stays tight to the surface and out of the way in narrow spots.
Can the LEDs be replaced?
No, they are integrated rather than replaceable lamps. Total load is 6W, drawn from a pair of 3W LEDs, so running costs stay low over a long evening.
Is it dimmable?
No. It runs at full output whenever the circuit is live, and it has no switch of its own.
Will it cope with British weather?
Yes, it is rated for outdoor use against rain and splashing in normal garden and frontage positions. An occasional wipe of the lenses keeps the light output clean.
Is there a warranty?
It carries a three year warranty.