Free Delivery on all orders over £99*

COB LED Strip 8W/m Cool White Cut-to-Length 25m - 12V

£9499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip light delivers a continuous, dot-free line of light along a flexible reel, with none of the visible spotting you get from older spaced-diode tape. It draws 8W per metre and gives 760 lumens per metre in a crisp 4000K cool white, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Sold by many simply as LED tape, it ships on a 25 metre reel that cuts to length at the marked points every 2.5cm, so a run can be sized exactly to the job.

Because the line of light is even and glare-controlled, it works well tucked into cove and pelmet details, run under kitchen wall units, along shelving, or set into a recessed channel for an unbroken edge of light. The 760 lumens per metre suits accent and under-cabinet tasks rather than lighting a whole room, so coverage is best judged by the length of run you light rather than a floor area. Plan the reel against the length of the detail you want to pick out, then cut at the nearest 2.5cm mark.

The strip runs on 12V DC and needs a matching 12V LED driver, which is supplied separately and sized to the total wattage of the cut length you use. It is rated IP00, so it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location. Rated for 30,000 hours, the flexible backing follows gentle curves and the cool white tone holds steady along the run.

Specification
Power 8 W/m
Luminous flux 760 lm/m
Efficiency 95 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 25 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a separate driver?

Yes. It runs on 12V DC, so it cannot be wired straight to the mains and needs a matching 12V LED driver. Size the driver to the total wattage of the length you cut, allowing 8W for every metre used.

Can the strip be cut to length?

Yes. It cuts at the marked points every 2.5cm along the reel, so you can trim a run to fit the detail exactly. Only cut at those marked intervals, never between them.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, damp areas and any outdoor or sheltered-outdoor position.

How do I keep it clean?

Switch it off and let it cool, then wipe the surface gently with a dry or barely damp soft cloth. Avoid solvents and do not let moisture reach the diodes or the cut ends, as the strip has no water protection.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip light delivers a continuous, dot-free line of light along a flexible reel, with none of the visible spotting you get from older spaced-diode tape. It draws 8W per metre and gives 760 lumens per metre in a crisp 4000K cool white, with a high Ra90 colour rendering that keeps surfaces and finishes looking true. Sold by many simply as LED tape, it ships on a 25 metre reel that cuts to length at the marked points every 2.5cm, so a run can be sized exactly to the job.

    Because the line of light is even and glare-controlled, it works well tucked into cove and pelmet details, run under kitchen wall units, along shelving, or set into a recessed channel for an unbroken edge of light. The 760 lumens per metre suits accent and under-cabinet tasks rather than lighting a whole room, so coverage is best judged by the length of run you light rather than a floor area. Plan the reel against the length of the detail you want to pick out, then cut at the nearest 2.5cm mark.

    The strip runs on 12V DC and needs a matching 12V LED driver, which is supplied separately and sized to the total wattage of the cut length you use. It is rated IP00, so it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location. Rated for 30,000 hours, the flexible backing follows gentle curves and the cool white tone holds steady along the run.

    Specification
    Power 8 W/m
    Luminous flux 760 lm/m
    Efficiency 95 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 25 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a separate driver?

    Yes. It runs on 12V DC, so it cannot be wired straight to the mains and needs a matching 12V LED driver. Size the driver to the total wattage of the length you cut, allowing 8W for every metre used.

    Can the strip be cut to length?

    Yes. It cuts at the marked points every 2.5cm along the reel, so you can trim a run to fit the detail exactly. Only cut at those marked intervals, never between them.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, damp areas and any outdoor or sheltered-outdoor position.

    How do I keep it clean?

    Switch it off and let it cool, then wipe the surface gently with a dry or barely damp soft cloth. Avoid solvents and do not let moisture reach the diodes or the cut ends, as the strip has no water protection.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.