Free Delivery on all orders over £99*

COB LED Strip 8W/m 50m Reel Cut-to-Length 12V - Warm White

£18899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even ribbon of light with no visible hotspots. It draws 8W per metre and puts out 736 lumens per metre in a 3000K warm white, with a high CRI of Ra90 for accurate colour. Sold across the US as an LED tape light, the strip runs from a 12V DC LED driver rather than direct from the mains, and cuts to length at marked intervals every 2.5cm so a run can be trimmed to fit. The 50m reel covers long installs from a single roll.

Because it is dot-free, this strip suits cove and under-cabinet lighting, shelf and display edges, and outline runs where individual diodes would otherwise show through a diffuser. The warm 3000K tone works well in kitchens, living rooms and hallways where a soft, relaxed light is wanted. Coverage is best judged by the linear run rather than a floor area: at 736 lumens per metre it delivers a bright, continuous accent or task line along worktops, plinths and recesses. The IP00 rating means it is for dry indoor positions only, so keep it clear of bathrooms, damp utility areas and any outdoor location.

The diodes sit on a slim flexible backing 8mm wide, letting the strip bend around corners and into tight channels and aluminium profiles. It is rated IP00 for dry interiors, with a stated 30,000 hour lifespan. A matching 12V DC driver is needed to power the run and is specified separately, sized to the total wattage of the cut length. We stock the COB strip alongside the wider LED strip range, including matching profiles and drivers to complete the install.

Specification
Power 8 W/m
Luminous flux 736 lm/m
Efficiency 92 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 50 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 12V DC, so it must be powered through a matching 12V LED driver rather than wired straight into the mains. Size the driver to the total wattage of the length you install, allowing roughly 8W for every metre of strip used.

Where can the strip be cut?

The strip is cut-to-length at marked points every 2.5cm along the reel. Always cut on the marked line so the circuit stays intact, and only join or re-power sections using the correct connectors or solder pads.

Can it be used outdoors or in a bathroom?

No. This version is rated IP00, which is for dry indoor use only. It should not be fitted in bathrooms, damp utility spaces or any outdoor or sheltered-outdoor position; choose a coated IP65 strip for those locations instead.

How do I clean the strip?

Switch off and let it cool, then wipe gently along its length with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, and take care around any cut ends and solder points so the connections are not disturbed.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even ribbon of light with no visible hotspots. It draws 8W per metre and puts out 736 lumens per metre in a 3000K warm white, with a high CRI of Ra90 for accurate colour. Sold across the US as an LED tape light, the strip runs from a 12V DC LED driver rather than direct from the mains, and cuts to length at marked intervals every 2.5cm so a run can be trimmed to fit. The 50m reel covers long installs from a single roll.

    Because it is dot-free, this strip suits cove and under-cabinet lighting, shelf and display edges, and outline runs where individual diodes would otherwise show through a diffuser. The warm 3000K tone works well in kitchens, living rooms and hallways where a soft, relaxed light is wanted. Coverage is best judged by the linear run rather than a floor area: at 736 lumens per metre it delivers a bright, continuous accent or task line along worktops, plinths and recesses. The IP00 rating means it is for dry indoor positions only, so keep it clear of bathrooms, damp utility areas and any outdoor location.

    The diodes sit on a slim flexible backing 8mm wide, letting the strip bend around corners and into tight channels and aluminium profiles. It is rated IP00 for dry interiors, with a stated 30,000 hour lifespan. A matching 12V DC driver is needed to power the run and is specified separately, sized to the total wattage of the cut length. We stock the COB strip alongside the wider LED strip range, including matching profiles and drivers to complete the install.

    Specification
    Power 8 W/m
    Luminous flux 736 lm/m
    Efficiency 92 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 50 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 12V DC, so it must be powered through a matching 12V LED driver rather than wired straight into the mains. Size the driver to the total wattage of the length you install, allowing roughly 8W for every metre of strip used.

    Where can the strip be cut?

    The strip is cut-to-length at marked points every 2.5cm along the reel. Always cut on the marked line so the circuit stays intact, and only join or re-power sections using the correct connectors or solder pads.

    Can it be used outdoors or in a bathroom?

    No. This version is rated IP00, which is for dry indoor use only. It should not be fitted in bathrooms, damp utility spaces or any outdoor or sheltered-outdoor position; choose a coated IP65 strip for those locations instead.

    How do I clean the strip?

    Switch off and let it cool, then wipe gently along its length with a dry or barely damp lint-free cloth. Avoid soaking it or using solvents, and take care around any cut ends and solder points so the connections are not disturbed.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.