Free Delivery on all orders over £99*

COB LED Strip 8W/m 50m Cut-to-Length Reel 12V - Cool White

£18899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes set on a flexible reel, giving an even run of light with no visible spotting along its length. It draws 8 watts per metre and puts out 800 lumens per metre in a Cool White 4000K tone, so the light reads bright and clean rather than warm. Often sold in the US as COB LED tape or light strip, it lays into channels, profiles and tight returns where a smooth, uninterrupted line matters more than raw spread. The reel runs to 50 metres and can be cut to length at the marked points every 2.5 cm.

Because the light comes as a low, linear wash rather than a beam, it suits cove detailing, shelf and cabinet under-runs, stair stringers and display joinery where the source itself should stay hidden. The dot-free face means the lit line looks solid when viewed straight on, which is why it works well in shallow channels and along edges close to eye level. Coverage here is about the length of run you build rather than a floor area, so plan the metreage to the feature you want to graze, then cut at the nearest 2.5 cm mark to finish the run cleanly.

The strip runs on 12V DC and needs a matching LED driver, which is supplied separately and sized to the total wattage of the run you cut. It carries an IP00 rating, so it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location. Colour rendering is rated at Ra 90 for accurate tones on whatever it lights, with a stated lifespan of around 30,000 hours. We also stock matching 12V drivers and aluminium profiles across the range to complete an install.

Specification
Power 8 W/m
Luminous flux 800 lm/m
Efficiency 100 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 50 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a separate driver?

Yes. It runs on 12V DC, so it cannot connect straight to the mains and needs a 12V LED driver, supplied separately. Size the driver to the total wattage of the length you cut, allowing 8 watts for every metre in the run.

Can the strip be cut to length?

Yes. It can be cut at the marked cut points, which fall every 2.5 cm along the reel. Only cut on those marks so the circuit stays intact, and measure your run before cutting from the 50 metre reel.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means it is for dry indoor use only. Keep it out of bathrooms, damp areas and any outdoor position, and choose a coated IP65 strip where moisture is a factor.

How do I keep the strip clean?

Wipe the surface gently with a dry or barely damp lint-free cloth once the supply is switched off. Avoid solvents and heavy moisture, since the bare IP00 strip is not sealed against water, and let it dry fully before powering it back on.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes set on a flexible reel, giving an even run of light with no visible spotting along its length. It draws 8 watts per metre and puts out 800 lumens per metre in a Cool White 4000K tone, so the light reads bright and clean rather than warm. Often sold in the US as COB LED tape or light strip, it lays into channels, profiles and tight returns where a smooth, uninterrupted line matters more than raw spread. The reel runs to 50 metres and can be cut to length at the marked points every 2.5 cm.

    Because the light comes as a low, linear wash rather than a beam, it suits cove detailing, shelf and cabinet under-runs, stair stringers and display joinery where the source itself should stay hidden. The dot-free face means the lit line looks solid when viewed straight on, which is why it works well in shallow channels and along edges close to eye level. Coverage here is about the length of run you build rather than a floor area, so plan the metreage to the feature you want to graze, then cut at the nearest 2.5 cm mark to finish the run cleanly.

    The strip runs on 12V DC and needs a matching LED driver, which is supplied separately and sized to the total wattage of the run you cut. It carries an IP00 rating, so it is for dry indoor positions only and should be kept clear of bathrooms, damp areas and any outdoor location. Colour rendering is rated at Ra 90 for accurate tones on whatever it lights, with a stated lifespan of around 30,000 hours. We also stock matching 12V drivers and aluminium profiles across the range to complete an install.

    Specification
    Power 8 W/m
    Luminous flux 800 lm/m
    Efficiency 100 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 50 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a separate driver?

    Yes. It runs on 12V DC, so it cannot connect straight to the mains and needs a 12V LED driver, supplied separately. Size the driver to the total wattage of the length you cut, allowing 8 watts for every metre in the run.

    Can the strip be cut to length?

    Yes. It can be cut at the marked cut points, which fall every 2.5 cm along the reel. Only cut on those marks so the circuit stays intact, and measure your run before cutting from the 50 metre reel.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means it is for dry indoor use only. Keep it out of bathrooms, damp areas and any outdoor position, and choose a coated IP65 strip where moisture is a factor.

    How do I keep the strip clean?

    Wipe the surface gently with a dry or barely damp lint-free cloth once the supply is switched off. Avoid solvents and heavy moisture, since the bare IP00 strip is not sealed against water, and let it dry fully before powering it back on.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.