Free Delivery on all orders over £99*

COB LED Strip 8W/m 25m 12V Cuttable Reel - Warm White

£9499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving a smooth band of light with no visible spotting along its length. It runs at 8W per metre and puts out 720 lumens per metre in a warm white 3000K tone, so the lit line reads soft and even rather than as a row of separate points. The strip is supplied on a 25m reel and cuts to length at the marked points every 2.5cm, letting you tailor each run to the exact span you need. In US terms this is a low-voltage warm white LED tape, sized and trimmed the same way.

The strip suits under-cabinet runs, shelf edges, cove and pelmet detailing, plinth lines and display joinery where a clean unbroken glow matters more than wide spread. Because the output is directional along the reel, think of it as edge and outline lighting rather than as ambient room lighting: it grazes a surface or underlines a feature rather than filling a space with general brightness. With CRI Ra90 the warm white renders timber, paint and worktop finishes faithfully, which makes it a good fit for kitchens, joinery and retail shelving. Plan the layout around the 2.5cm cut interval so each section lands cleanly within a recess or channel.

This is a 12V DC strip, so it is not mains-direct and needs a matching 12V LED driver, sized to the total wattage of the run and sold separately. Rated IP00, it is for dry indoor use only; keep it out of bathrooms, damp areas and any outdoor position. The flexible PCB lets it follow gentle curves and inside corners, and the rated lifespan is 30,000 hours. The reel weighs 280g and cuts only at the printed marks, so measure each length before trimming.

Specification
Power 8 W/m
Luminous flux 720 lm/m
Efficiency 90 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 25 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It is a 12V DC strip, so it cannot connect straight to the mains and needs a matching 12V LED driver. Size the driver to the total wattage of the run, allowing 8W for every metre installed. The driver is sold separately.

Can the strip be cut to length?

Yes. It can be trimmed every 2.5cm at the marked cut points along the reel. Always cut on the printed marks rather than between them, and measure each section first so it sits cleanly within its recess or channel.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means dry indoor use only. It offers no protection against moisture, so keep it clear of bathrooms, kitchens splashback zones and any outdoor or damp location.

What does the warm white COB look like compared with a standard strip?

COB places the diodes in a continuous line behind a diffused layer, so the result is a smooth, dot-free band of light rather than a row of visible points. At 3000K it gives a warm white glow, and the Ra90 rating means colours and finishes are rendered faithfully under it.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving a smooth band of light with no visible spotting along its length. It runs at 8W per metre and puts out 720 lumens per metre in a warm white 3000K tone, so the lit line reads soft and even rather than as a row of separate points. The strip is supplied on a 25m reel and cuts to length at the marked points every 2.5cm, letting you tailor each run to the exact span you need. In US terms this is a low-voltage warm white LED tape, sized and trimmed the same way.

    The strip suits under-cabinet runs, shelf edges, cove and pelmet detailing, plinth lines and display joinery where a clean unbroken glow matters more than wide spread. Because the output is directional along the reel, think of it as edge and outline lighting rather than as ambient room lighting: it grazes a surface or underlines a feature rather than filling a space with general brightness. With CRI Ra90 the warm white renders timber, paint and worktop finishes faithfully, which makes it a good fit for kitchens, joinery and retail shelving. Plan the layout around the 2.5cm cut interval so each section lands cleanly within a recess or channel.

    This is a 12V DC strip, so it is not mains-direct and needs a matching 12V LED driver, sized to the total wattage of the run and sold separately. Rated IP00, it is for dry indoor use only; keep it out of bathrooms, damp areas and any outdoor position. The flexible PCB lets it follow gentle curves and inside corners, and the rated lifespan is 30,000 hours. The reel weighs 280g and cuts only at the printed marks, so measure each length before trimming.

    Specification
    Power 8 W/m
    Luminous flux 720 lm/m
    Efficiency 90 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 25 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It is a 12V DC strip, so it cannot connect straight to the mains and needs a matching 12V LED driver. Size the driver to the total wattage of the run, allowing 8W for every metre installed. The driver is sold separately.

    Can the strip be cut to length?

    Yes. It can be trimmed every 2.5cm at the marked cut points along the reel. Always cut on the printed marks rather than between them, and measure each section first so it sits cleanly within its recess or channel.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means dry indoor use only. It offers no protection against moisture, so keep it clear of bathrooms, kitchens splashback zones and any outdoor or damp location.

    What does the warm white COB look like compared with a standard strip?

    COB places the diodes in a continuous line behind a diffused layer, so the result is a smooth, dot-free band of light rather than a row of visible points. At 3000K it gives a warm white glow, and the Ra90 rating means colours and finishes are rendered faithfully under it.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.