Free Delivery on all orders over £99*

COB LED Strip 10W/m IP65 12V Warm White - 5m Reel

£2699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip puts out a continuous, dot-free line of light along a flexible 5 metre reel, drawing 10W per metre for 860 lumens per metre of even warm white at 3000K. Unlike older spaced-diode tape, the COB (chip-on-board) layout hides the individual emitters under a single coated surface, so the run reads as one smooth band rather than a row of bright points. In US terms this is the same format sold as warm white COB led tape or led strip light, and it cuts to length at the marked 2.5 cm intervals so a run can be sized to the exact length needed.

With an IP65 rating the strip is coated against moisture and suits sheltered outdoor and damp positions as well as dry interiors. It works well outlining eaves, soffits, fences, pergolas and patio edges outside, and under kitchen cabinets, along coving, behind shelving or around a mirror inside. Because it is a linear accent rather than ambient room lighting, think of it in terms of the length of edge or cove you want to graze rather than a floor area: at 860 lumens per metre it gives a soft, consistent wash along whatever line it follows, with the warm 3000K tone keeping the effect mellow.

The strip runs on 12V DC, so it needs a matching 12V LED driver, which is supplied separately and should be sized to the total wattage of the length installed. It cuts only at the marked 2.5 cm points, and the adhesive backing fixes it to a clean, dry surface or into an aluminium profile for heat dissipation and a tidier finish. Colour rendering is rated Ra90 for accurate tones, and the LEDs are rated for around 30,000 hours. We also stock the matching 12V drivers and aluminium profiles to complete the run.

Specification
Power 10 W/m
Luminous flux 860 lm/m
Efficiency 86 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a separate driver?

Yes. It runs on 12V DC, not mains voltage, so it must be powered through a 12V LED driver, which is supplied separately. Size the driver to the total wattage of the length you install, allowing for the 10W per metre draw plus a little headroom.

Can the strip be cut to length, and where?

Yes. The reel can be cut to size at the marked cut points, which fall every 2.5 cm along the strip. Always cut on the marked line so the circuit stays intact, and only join offcuts using the correct connectors or solder pads.

Is it suitable for outdoor or damp areas?

Yes. The strip carries an IP65 rating, so it is coated against moisture and suited to sheltered outdoor and damp locations such as eaves, patios, pergolas and bathrooms. It is not intended for full submersion, so keep it clear of standing water.

How do I clean and maintain the strip?

Wipe the coated surface gently with a soft, dry or barely damp cloth once the supply is switched off, avoiding solvents and abrasive cleaners that could mark the coating. For strips fitted in an aluminium profile, a quick wipe of the diffuser keeps the output even and bright.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip puts out a continuous, dot-free line of light along a flexible 5 metre reel, drawing 10W per metre for 860 lumens per metre of even warm white at 3000K. Unlike older spaced-diode tape, the COB (chip-on-board) layout hides the individual emitters under a single coated surface, so the run reads as one smooth band rather than a row of bright points. In US terms this is the same format sold as warm white COB led tape or led strip light, and it cuts to length at the marked 2.5 cm intervals so a run can be sized to the exact length needed.

    With an IP65 rating the strip is coated against moisture and suits sheltered outdoor and damp positions as well as dry interiors. It works well outlining eaves, soffits, fences, pergolas and patio edges outside, and under kitchen cabinets, along coving, behind shelving or around a mirror inside. Because it is a linear accent rather than ambient room lighting, think of it in terms of the length of edge or cove you want to graze rather than a floor area: at 860 lumens per metre it gives a soft, consistent wash along whatever line it follows, with the warm 3000K tone keeping the effect mellow.

    The strip runs on 12V DC, so it needs a matching 12V LED driver, which is supplied separately and should be sized to the total wattage of the length installed. It cuts only at the marked 2.5 cm points, and the adhesive backing fixes it to a clean, dry surface or into an aluminium profile for heat dissipation and a tidier finish. Colour rendering is rated Ra90 for accurate tones, and the LEDs are rated for around 30,000 hours. We also stock the matching 12V drivers and aluminium profiles to complete the run.

    Specification
    Power 10 W/m
    Luminous flux 860 lm/m
    Efficiency 86 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a separate driver?

    Yes. It runs on 12V DC, not mains voltage, so it must be powered through a 12V LED driver, which is supplied separately. Size the driver to the total wattage of the length you install, allowing for the 10W per metre draw plus a little headroom.

    Can the strip be cut to length, and where?

    Yes. The reel can be cut to size at the marked cut points, which fall every 2.5 cm along the strip. Always cut on the marked line so the circuit stays intact, and only join offcuts using the correct connectors or solder pads.

    Is it suitable for outdoor or damp areas?

    Yes. The strip carries an IP65 rating, so it is coated against moisture and suited to sheltered outdoor and damp locations such as eaves, patios, pergolas and bathrooms. It is not intended for full submersion, so keep it clear of standing water.

    How do I clean and maintain the strip?

    Wipe the coated surface gently with a soft, dry or barely damp cloth once the supply is switched off, avoiding solvents and abrasive cleaners that could mark the coating. For strips fitted in an aluminium profile, a quick wipe of the diffuser keeps the output even and bright.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.