Free Delivery on all orders over £99*

COB LED Strip 10W/m Daylight 25m IP65 12V - Cuttable Reel

£13499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip runs as a continuous, dot-free line of light along a flexible 25m reel, putting out 950 lumens per metre at 10 watts per metre in a crisp 6500K daylight tone. Unlike older spaced-diode tape, the COB construction packs the diodes into one even band, so there are no visible hotspots or shadow gaps along the run. What American buyers call COB led tape light is the same product, and its high Ra 90 colour rendering keeps surfaces and finishes looking true. It cuts cleanly at the marked points every 2.5 cm, letting you tailor each length to the space.

The IP65 rating makes this strip a good fit for damp and sheltered outdoor settings as well as indoor runs, so it covers kitchen plinths and under-cabinet lines, cove and shelf detailing, stair edges, and exterior eaves or patio borders. Coverage is best judged by the length you install rather than a floor area, since this is a linear accent and task line rather than ambient room lighting. The daylight output gives a clean, bright wash that suits worktops and detailing where colour accuracy matters. Plan the reel into your layout by the run length you need, cutting only at the marked 2.5 cm intervals.

The strip is built on a flexible reel and runs on 12V DC, so it needs a matching 12V LED driver, which is sold separately and must be sized to the total wattage of the run you install. The IP65 coating seals the strip against moisture and dust for wet and exposed positions, while the rated lifespan reaches 30,000 hours. Self-adhesive backing supports most clean, dry mounting surfaces. We also stock matching drivers and profiles across the range to complete an installation.

Specification
Power 10 W/m
Luminous flux 950 lm/m
Efficiency 95 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 6500K (Daylight)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 25 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver, and what size?

Yes. This is a 12V DC strip, so it cannot connect straight to the mains and needs a 12V LED driver, which is sold separately. Size the driver to the total wattage of the run you install, allowing 10 watts for every metre of strip, plus a little headroom.

Where can the strip be cut?

The strip cuts to length only at the marked cut points, which fall every 2.5 cm along the reel. Cutting at any other position will damage the affected section, so always trim on the printed line. Each cut length still runs from the same 12V driver.

Can it be used outdoors or in damp areas?

Yes. The IP65 rating means the strip is coated against moisture and dust, so it suits damp and sheltered outdoor positions such as eaves, patio borders and covered exterior runs, as well as kitchens and bathrooms indoors. Keep the driver itself in a dry, protected location.

How do I clean the strip?

Wipe the strip gently with a soft, dry or barely damp cloth to lift dust and grime from the IP65 coating. Avoid solvents and abrasive cleaners, which can mark the surface. Make sure the strip is switched off and dry before it is powered back on.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip runs as a continuous, dot-free line of light along a flexible 25m reel, putting out 950 lumens per metre at 10 watts per metre in a crisp 6500K daylight tone. Unlike older spaced-diode tape, the COB construction packs the diodes into one even band, so there are no visible hotspots or shadow gaps along the run. What American buyers call COB led tape light is the same product, and its high Ra 90 colour rendering keeps surfaces and finishes looking true. It cuts cleanly at the marked points every 2.5 cm, letting you tailor each length to the space.

    The IP65 rating makes this strip a good fit for damp and sheltered outdoor settings as well as indoor runs, so it covers kitchen plinths and under-cabinet lines, cove and shelf detailing, stair edges, and exterior eaves or patio borders. Coverage is best judged by the length you install rather than a floor area, since this is a linear accent and task line rather than ambient room lighting. The daylight output gives a clean, bright wash that suits worktops and detailing where colour accuracy matters. Plan the reel into your layout by the run length you need, cutting only at the marked 2.5 cm intervals.

    The strip is built on a flexible reel and runs on 12V DC, so it needs a matching 12V LED driver, which is sold separately and must be sized to the total wattage of the run you install. The IP65 coating seals the strip against moisture and dust for wet and exposed positions, while the rated lifespan reaches 30,000 hours. Self-adhesive backing supports most clean, dry mounting surfaces. We also stock matching drivers and profiles across the range to complete an installation.

    Specification
    Power 10 W/m
    Luminous flux 950 lm/m
    Efficiency 95 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 6500K (Daylight)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 25 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver, and what size?

    Yes. This is a 12V DC strip, so it cannot connect straight to the mains and needs a 12V LED driver, which is sold separately. Size the driver to the total wattage of the run you install, allowing 10 watts for every metre of strip, plus a little headroom.

    Where can the strip be cut?

    The strip cuts to length only at the marked cut points, which fall every 2.5 cm along the reel. Cutting at any other position will damage the affected section, so always trim on the printed line. Each cut length still runs from the same 12V driver.

    Can it be used outdoors or in damp areas?

    Yes. The IP65 rating means the strip is coated against moisture and dust, so it suits damp and sheltered outdoor positions such as eaves, patio borders and covered exterior runs, as well as kitchens and bathrooms indoors. Keep the driver itself in a dry, protected location.

    How do I clean the strip?

    Wipe the strip gently with a soft, dry or barely damp cloth to lift dust and grime from the IP65 coating. Avoid solvents and abrasive cleaners, which can mark the surface. Make sure the strip is switched off and dry before it is powered back on.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.