Free Delivery on all orders over £99*

COB LED Strip 10W/m Cool White - 5m 12V Reel

£1899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip is a continuous, dot-free line of diodes on a flexible 5m reel, giving an even line of cool white light with no visible spots along its length. Often searched as led tape or a light strip, it draws 10W per metre and puts out 1000 lumens per metre at a 4000K cool white tone, with a CRI of Ra90 for accurate colour. The strip runs on 12V DC, so it pairs with a matching 12V LED driver (sold separately) rather than plugging straight into a wall socket.

It suits under-cabinet runs, shelf edges, cove and ceiling perimeters, and display or task accents where a smooth band of light is wanted instead of individual points. The dot-free face makes it a good fit behind diffusers and in shallow profiles, where spaced diodes would otherwise show as bright marks. As a continuous line at 1000 lumens per metre it lifts a worktop or grazes a wall evenly, so plan it as accent and edge lighting rather than a room's main ambient source.

The strip is supplied on a 5m reel and cuts to length only at the marked 2.5 cm intervals, so you can trim it to the run you need. Its IP00 rating means it is for dry indoor use only, so keep it clear of bathrooms, damp areas and any outdoor position. Rated for around 30,000 hours and weighing just 58g, it mounts on its self-adhesive backing to clean, dry surfaces. Other widths and outputs are offered across the COB LED Strip range alongside compatible 12V drivers.

Specification
Power 10 W/m
Luminous flux 1000 lm/m
Efficiency 100 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this LED strip need a driver?

Yes. It runs on 12V DC, so it needs a matching 12V LED driver, which is sold separately. It does not connect directly to the mains, and the driver should be sized to cover the total wattage of the length you install.

Can the strip be cut to length?

Yes. It can be trimmed to fit your run, but only at the marked cut points, which fall every 2.5 cm. Cutting at any other position will leave a non-working section.

Can I use this strip outdoors or in a bathroom?

No. This strip is rated IP00, which is for dry indoor use only. Keep it clear of bathrooms, kitchens splash zones, damp areas and any outdoor or sheltered-outdoor position.

How do I clean the strip?

Wipe the strip gently with a soft, dry or barely damp cloth once it is switched off and cool. Avoid solvents and excess moisture, and never soak it, as the strip is not sealed against water.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip is a continuous, dot-free line of diodes on a flexible 5m reel, giving an even line of cool white light with no visible spots along its length. Often searched as led tape or a light strip, it draws 10W per metre and puts out 1000 lumens per metre at a 4000K cool white tone, with a CRI of Ra90 for accurate colour. The strip runs on 12V DC, so it pairs with a matching 12V LED driver (sold separately) rather than plugging straight into a wall socket.

    It suits under-cabinet runs, shelf edges, cove and ceiling perimeters, and display or task accents where a smooth band of light is wanted instead of individual points. The dot-free face makes it a good fit behind diffusers and in shallow profiles, where spaced diodes would otherwise show as bright marks. As a continuous line at 1000 lumens per metre it lifts a worktop or grazes a wall evenly, so plan it as accent and edge lighting rather than a room's main ambient source.

    The strip is supplied on a 5m reel and cuts to length only at the marked 2.5 cm intervals, so you can trim it to the run you need. Its IP00 rating means it is for dry indoor use only, so keep it clear of bathrooms, damp areas and any outdoor position. Rated for around 30,000 hours and weighing just 58g, it mounts on its self-adhesive backing to clean, dry surfaces. Other widths and outputs are offered across the COB LED Strip range alongside compatible 12V drivers.

    Specification
    Power 10 W/m
    Luminous flux 1000 lm/m
    Efficiency 100 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this LED strip need a driver?

    Yes. It runs on 12V DC, so it needs a matching 12V LED driver, which is sold separately. It does not connect directly to the mains, and the driver should be sized to cover the total wattage of the length you install.

    Can the strip be cut to length?

    Yes. It can be trimmed to fit your run, but only at the marked cut points, which fall every 2.5 cm. Cutting at any other position will leave a non-working section.

    Can I use this strip outdoors or in a bathroom?

    No. This strip is rated IP00, which is for dry indoor use only. Keep it clear of bathrooms, kitchens splash zones, damp areas and any outdoor or sheltered-outdoor position.

    How do I clean the strip?

    Wipe the strip gently with a soft, dry or barely damp cloth once it is switched off and cool. Avoid solvents and excess moisture, and never soak it, as the strip is not sealed against water.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.