Free Delivery on all orders over £99*

COB LED Strip 10W/m 50m 12V Cool White

£18899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even run of light with none of the spotting you see on older diode strips. It draws 10W per metre and puts out 1000 lumens per metre in a crisp 4000K cool white, with a Ra90 colour rendering that keeps surfaces and finishes looking true. In the US this format is usually sold as COB LED tape or tape light, and it does the same job here: a smooth, low-profile line of brightness that follows whatever surface it is fixed to. The reel runs to 50 metres at 8mm wide, so a single roll covers a long run before any joining is needed.

Because it is flexible and cuts to length at the marked 2.5cm interval, this strip suits coving, shelf edges, under-cabinet runs, display cases, stair stringers and the underside of kitchen units. It is rated IP00, so it is for dry indoor use only and should be kept clear of bathrooms, kitchens splash zones and any outdoor or damp location. Coverage is best judged by the run rather than a floor area: at 1000 lumens per metre it gives a bright, accent-grade line for outlining a feature, washing a shelf or lifting a worktop, and longer continuous lengths build a brighter overall effect along walls and ceilings.

The strip is built on a flexible backing that bends around corners and follows curved profiles, and it cuts cleanly only at the printed 2.5cm cut points. It runs on 12V DC, so it is not a mains-direct fitting: a matching 12V LED driver is needed and is sold separately, sized to the total wattage of the length you install. Rated life is around 30,000 hours and the strip weighs 568g across the full reel. We also stock matching drivers and connectors in the range to complete an installation.

Specification
Power 10 W/m
Luminous flux 1000 lm/m
Efficiency 100 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 90
Cut interval every 2.5 cm
Reel length 50 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 12V DC, not mains voltage, so it needs a matching 12V LED driver, which is sold separately. Size the driver to the total wattage of the length you install, allowing for 10W per metre.

Can the strip be cut to length?

Yes. It cuts cleanly at the printed cut points, which fall every 2.5cm along the reel. Only cut at those marked intervals so the circuit stays intact, then connect the cut section back to the driver.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, splash zones and any outdoor or damp location, and choose an IP65 coated strip for those areas instead.

How do I clean the strip?

Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid solvents and soaking, as this is an IP00 strip with no water protection, and take care around the cut and connection points.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The COB LED Strip is a continuous, dot-free line of diodes on a flexible reel, giving an even run of light with none of the spotting you see on older diode strips. It draws 10W per metre and puts out 1000 lumens per metre in a crisp 4000K cool white, with a Ra90 colour rendering that keeps surfaces and finishes looking true. In the US this format is usually sold as COB LED tape or tape light, and it does the same job here: a smooth, low-profile line of brightness that follows whatever surface it is fixed to. The reel runs to 50 metres at 8mm wide, so a single roll covers a long run before any joining is needed.

    Because it is flexible and cuts to length at the marked 2.5cm interval, this strip suits coving, shelf edges, under-cabinet runs, display cases, stair stringers and the underside of kitchen units. It is rated IP00, so it is for dry indoor use only and should be kept clear of bathrooms, kitchens splash zones and any outdoor or damp location. Coverage is best judged by the run rather than a floor area: at 1000 lumens per metre it gives a bright, accent-grade line for outlining a feature, washing a shelf or lifting a worktop, and longer continuous lengths build a brighter overall effect along walls and ceilings.

    The strip is built on a flexible backing that bends around corners and follows curved profiles, and it cuts cleanly only at the printed 2.5cm cut points. It runs on 12V DC, so it is not a mains-direct fitting: a matching 12V LED driver is needed and is sold separately, sized to the total wattage of the length you install. Rated life is around 30,000 hours and the strip weighs 568g across the full reel. We also stock matching drivers and connectors in the range to complete an installation.

    Specification
    Power 10 W/m
    Luminous flux 1000 lm/m
    Efficiency 100 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 90
    Cut interval every 2.5 cm
    Reel length 50 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 12V DC, not mains voltage, so it needs a matching 12V LED driver, which is sold separately. Size the driver to the total wattage of the length you install, allowing for 10W per metre.

    Can the strip be cut to length?

    Yes. It cuts cleanly at the printed cut points, which fall every 2.5cm along the reel. Only cut at those marked intervals so the circuit stays intact, then connect the cut section back to the driver.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means dry indoor use only. Keep it out of bathrooms, splash zones and any outdoor or damp location, and choose an IP65 coated strip for those areas instead.

    How do I clean the strip?

    Switch it off and let it cool, then wipe the surface gently with a dry or barely damp lint-free cloth. Avoid solvents and soaking, as this is an IP00 strip with no water protection, and take care around the cut and connection points.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.