Free Delivery on all orders over £99*

COB LED Strip 10W/m 24V Warm White 5m Reel

£2199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip puts out a continuous, dot-free line of light along a flexible 5m reel, drawing 10W per metre and giving 920 lumens per metre in a warm white 3000K tone. Unlike spaced SMD led strip lights, the COB format places the diodes in a tight run so there are no visible hotspots, just an even line. Known in the US as COB led tape light, it cuts to length every 5cm at the marked points, so you can trim the reel to fit a shelf, cove or run exactly. It runs from a 24V DC LED driver, which is needed to power it and is sold separately.

The strip suits under-cabinet lighting in a kitchen, cove and recess detailing, shelf edges, display units and accent runs behind a headboard or media wall. Its warm 3000K output and Ra90 colour rendering keep colours and surfaces looking natural, so it works well where the light grazes a worktop or picks out joinery. Rather than lighting a whole room, it lays down a soft, continuous accent line wherever the reel is fixed, and the brightness builds with the length you install. Plan your run length against the 5m reel and pair it with a driver sized for the total wattage you fit.

Built on a flexible PCB with a self-adhesive backing, the strip bends around shallow curves and sits flat along straight channels. It is rated IP00, so it is for dry indoor use only and should be kept out of bathrooms, damp areas and any outdoor location. The 24V DC supply means it is not mains-direct and must run from a matching LED driver. Rated for 30,000 hours with a single fixed warm white tone, it is best mounted in an aluminium profile for heat management and a cleaner finish. Other lengths and drive options sit in the same COB LED Strip range.

Specification
Power 10 W/m
Luminous flux 920 lm/m
Efficiency 92 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 5 cm
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It is a 24V DC strip, so it does not run straight from a wall socket and needs a matching 24V LED driver. The driver is sold separately, and you should size it to cover the total wattage of the length you install, at 10W per metre.

Can the strip be cut to length?

Yes. The reel can be trimmed every 5cm at the marked cut points, so you can fit it to a shelf, cove or run. Only cut at the marked intervals, and use connectors or solder to rejoin sections if needed.

Can it be used outdoors or in a bathroom?

No. This strip is rated IP00, which means it is for dry indoor use only. Keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor location, where a coated IP65 strip would be required instead.

What is the difference between COB and SMD strip?

A COB strip places the diodes in a continuous line, so you get an even, dot-free run of light with no visible hotspots. An SMD strip uses spaced individual diodes, which can show points of light. This COB version gives a smoother result, ideal for cove and under-cabinet work.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip puts out a continuous, dot-free line of light along a flexible 5m reel, drawing 10W per metre and giving 920 lumens per metre in a warm white 3000K tone. Unlike spaced SMD led strip lights, the COB format places the diodes in a tight run so there are no visible hotspots, just an even line. Known in the US as COB led tape light, it cuts to length every 5cm at the marked points, so you can trim the reel to fit a shelf, cove or run exactly. It runs from a 24V DC LED driver, which is needed to power it and is sold separately.

    The strip suits under-cabinet lighting in a kitchen, cove and recess detailing, shelf edges, display units and accent runs behind a headboard or media wall. Its warm 3000K output and Ra90 colour rendering keep colours and surfaces looking natural, so it works well where the light grazes a worktop or picks out joinery. Rather than lighting a whole room, it lays down a soft, continuous accent line wherever the reel is fixed, and the brightness builds with the length you install. Plan your run length against the 5m reel and pair it with a driver sized for the total wattage you fit.

    Built on a flexible PCB with a self-adhesive backing, the strip bends around shallow curves and sits flat along straight channels. It is rated IP00, so it is for dry indoor use only and should be kept out of bathrooms, damp areas and any outdoor location. The 24V DC supply means it is not mains-direct and must run from a matching LED driver. Rated for 30,000 hours with a single fixed warm white tone, it is best mounted in an aluminium profile for heat management and a cleaner finish. Other lengths and drive options sit in the same COB LED Strip range.

    Specification
    Power 10 W/m
    Luminous flux 920 lm/m
    Efficiency 92 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 5 cm
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It is a 24V DC strip, so it does not run straight from a wall socket and needs a matching 24V LED driver. The driver is sold separately, and you should size it to cover the total wattage of the length you install, at 10W per metre.

    Can the strip be cut to length?

    Yes. The reel can be trimmed every 5cm at the marked cut points, so you can fit it to a shelf, cove or run. Only cut at the marked intervals, and use connectors or solder to rejoin sections if needed.

    Can it be used outdoors or in a bathroom?

    No. This strip is rated IP00, which means it is for dry indoor use only. Keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor location, where a coated IP65 strip would be required instead.

    What is the difference between COB and SMD strip?

    A COB strip places the diodes in a continuous line, so you get an even, dot-free run of light with no visible hotspots. An SMD strip uses spaced individual diodes, which can show points of light. This COB version gives a smoother result, ideal for cove and under-cabinet work.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.