Free Delivery on all orders over £99*

COB LED Strip 10W/m 24V Warm White 25m - IP65

£14999
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This COB LED strip light gives a continuous, dot-free line of light along a flexible 25m reel, with no visible diodes to break up the run. It draws 10W per metre and puts out 860 lumens per metre in a 3000K warm white tone, with a high CRI of Ra90 for accurate colour. Known in the US as COB LED tape, it cuts to length at the marked points every 5cm, so the run can be sized to the job. It runs on 24V DC, so it needs a matching 24V LED driver, supplied separately.

Because it carries an IP65 rating, this strip suits both dry interiors and damp or sheltered outdoor locations. It works well as a continuous outline for cove and coffer detailing, under kitchen cabinets and shelving, along stair edges, or around a covered patio or pergola. The even, dot-free output is well suited to grazing along a surface where spaced diodes would otherwise show, and the warm 3000K tone keeps the effect soft rather than clinical. Throw stays close and linear, marking edges and ledges rather than lighting a whole room.

The strip is a flexible reel that bends around corners and curves, and the IP65 coating seals it against moisture and dust for outdoor and wet-area use. Cut only at the marked 5cm intervals, then feed each section from a 24V DC driver rated for the total length in use. Rated for around 30,000 hours, it offers a long service life across permanent installations.

Specification
Power 10 W/m
Luminous flux 860 lm/m
Efficiency 86 lm/W
Voltage 24V DC
Driver 24V DC LED driver required (sold separately)
IP rating IP65
Colour temperature 3000K (Warm White)
Colour rendering (CRI) Ra 90
Cut interval every 5 cm
Reel length 25 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this strip need a driver?

Yes. It runs on 24V DC, so it cannot connect straight to the mains and needs a 24V LED driver, which is supplied separately. Choose a driver rated for the total wattage of the length you install, at 10W per metre.

Can the strip be cut to length?

Yes. It cuts at the marked points every 5cm, so you can trim it to fit the run. Only cut at those marks, and keep any unused offcut for a separate section.

Is it suitable for outdoor or damp use?

Yes. The IP65 rating means it is coated against moisture and dust, so it works in damp and sheltered outdoor spots such as a covered patio, pergola or eaves, as well as dry interiors.

How should the strip be cleaned?

Wipe the surface gently with a soft, dry or barely damp cloth once the power is off. Avoid solvents and harsh cleaners, which can mark the coating, and do not soak the cut ends.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This COB LED strip light gives a continuous, dot-free line of light along a flexible 25m reel, with no visible diodes to break up the run. It draws 10W per metre and puts out 860 lumens per metre in a 3000K warm white tone, with a high CRI of Ra90 for accurate colour. Known in the US as COB LED tape, it cuts to length at the marked points every 5cm, so the run can be sized to the job. It runs on 24V DC, so it needs a matching 24V LED driver, supplied separately.

    Because it carries an IP65 rating, this strip suits both dry interiors and damp or sheltered outdoor locations. It works well as a continuous outline for cove and coffer detailing, under kitchen cabinets and shelving, along stair edges, or around a covered patio or pergola. The even, dot-free output is well suited to grazing along a surface where spaced diodes would otherwise show, and the warm 3000K tone keeps the effect soft rather than clinical. Throw stays close and linear, marking edges and ledges rather than lighting a whole room.

    The strip is a flexible reel that bends around corners and curves, and the IP65 coating seals it against moisture and dust for outdoor and wet-area use. Cut only at the marked 5cm intervals, then feed each section from a 24V DC driver rated for the total length in use. Rated for around 30,000 hours, it offers a long service life across permanent installations.

    Specification
    Power 10 W/m
    Luminous flux 860 lm/m
    Efficiency 86 lm/W
    Voltage 24V DC
    Driver 24V DC LED driver required (sold separately)
    IP rating IP65
    Colour temperature 3000K (Warm White)
    Colour rendering (CRI) Ra 90
    Cut interval every 5 cm
    Reel length 25 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this strip need a driver?

    Yes. It runs on 24V DC, so it cannot connect straight to the mains and needs a 24V LED driver, which is supplied separately. Choose a driver rated for the total wattage of the length you install, at 10W per metre.

    Can the strip be cut to length?

    Yes. It cuts at the marked points every 5cm, so you can trim it to fit the run. Only cut at those marks, and keep any unused offcut for a separate section.

    Is it suitable for outdoor or damp use?

    Yes. The IP65 rating means it is coated against moisture and dust, so it works in damp and sheltered outdoor spots such as a covered patio, pergola or eaves, as well as dry interiors.

    How should the strip be cleaned?

    Wipe the surface gently with a soft, dry or barely damp cloth once the power is off. Avoid solvents and harsh cleaners, which can mark the coating, and do not soak the cut ends.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.